2
1
1 display power connector | 2 | display graphics connector |
10If applicable, remove the camera cable connector from the system board.
11Remove the display assembly from the computer base by rotating it towards you.
Replacing the Display Assembly
1If applicable, replace the camera cable.
2Reconnect the display power cable to the connector on the system board.
3Reconnect the display graphics cable to the connector on the graphics card.
4Make note of the cable routing and carefully slide the
5Replace the four screws on the hinges.
6Reconnect the mini card cables to the Mini Cards if applicable (see "Wireless Mini Cards" on page 31).
Display Assembly
39
