When the processor is correctly seated, all four corners are aligned at the same height. If one or more corners of the processor are higher than the others, the processor is not seated correctly.

NOTICE: To prevent intermittent contact between the ZIF-socket cam screw and the processor when removing or replacing the processor, press to apply slight pressure to the center of the processor while turning the cam screw.

2Tighten the ZIF socket by turning the cam screw clockwise to secure the processor to the system board.

3Peel the back of the thermal cooling pad and adhere the pad to the portion of the thermal-cooling assembly that covers the processor.

4Replace the processor thermal-cooling assembly (see "Replacing the Processor Thermal-Cooling Assembly" on page 62).

5Update the BIOS using a flash BIOS-update program CD. See ("Flashing the BIOS" on page 85).

Processor

67

Page 67
Image 67
Dell Model PP06XA service manual Processor