22
Power Management Controller Board - Hall
CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer.
1Follow the procedures in "Before You Begin" on page 9.
2Remove the palm rest (see "Palm Rest" on page 49).
3Remove the card with internal bluetooth® wireless technology (see "Removing the Card With Bluetooth® Wireless Technology" on page 13).
4Remove the consumer infrared board (see "Removing the Consumer Infrared Board" on page 71).
5Remove the two screws that secure the power management controller to the computer base.
Power Management Controller Board - Hall
79
