ExpressCard Reader 59
16
ExpressCard Reader CAUTION: Before performing the following procedures, follow the safety
instructions in the
Product Information Guide
.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching a connector on the back panel of the
computer.
1
Follow the procedures in "Before You Begin" on page 9.
2
Remove any installed ExpressCards from the ExpressCard slot.
3
Remove the display assembly (see "Display Assembly" on page 37).
4
Remove the palm rest (see "Palm Rest" on page49).
5
Remove the four screws that secure the Express Card reader to the
computer base.
1M2 x 3-mm screws (4) 2Express Card re ader
2
1