Dell PP10S Hard Drive

Adding and Replacing Parts 79
4 Ground yourself and install the new memory module:
a Align the notch in the module edge connector with the tab in the connector slot.
b Slide the module firmly into the slot at a 45-degree angle, and rotate the module down
until it clicks into place. If you do not feel the click, remove the module and reinstall it.
5 Replace the cover.
NOTICE: If the memory module cover is difficult to close, remove the module and reinstall it. Forcing the
cover to close may damage your computer.
6 Insert the battery into the battery bay, or connect the AC adapter to your computer and an
electrical outlet.
7 Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system
configuration information.
To confirm the amount of memory installed in the computer, click the
Start button, click Help and
Support
, and then click Computer Information .
Hard Drive
NOTE: You need the Operating System CD to install the Microsoft® Windows® operating system. You
also need the Drivers and Utilities CD for your computer to install the drivers and utilities on the new hard
drive.
CAUTION: If you remove the hard drive from the computer when the drive is hot, do not touch the metal
housing of the hard drive.
CAUTION: Before working inside your computer, follow the safety instructions located in the Product
Information Guide.
NOTICE: To prevent data loss, turn off your computer before removing the hard drive. Do not remove the
hard drive while the computer is on, in standby mode, or in hibernate mode.