Dell V310 manual Check Your WEP KEY or WPA Passphrase, Disconnect from VPN Session

1Obtain the SSID of the network that the computer is connected to.

aType the IP address of your wireless access point (wireless router) into the address field of your Web browser.

If you do not know the IP address of the wireless access point: 1 Click , or click Start and then click Run.

2 In the Start Search or Run box, type cmd.

3Press Enter or click OK.

The Command Prompt window opens.

4Type ipconfig, and then press Enter. Check the Wireless Network Connection section:

•The “Default Gateway” entry is typically the wireless access point .

•The IP address appears as four sets of numbers separated by periods, such as 192.168.2.134.

bType the user name and password of the router when prompted.

cClick OK.

dOn the main page, click Wireless or any other selection where settings are stored. The SSID will be displayed.

eWrite down the SSID.

Note: Make sure you copy it exactly, including any capital letters.

2Print the printer network setup page. In the Wireless section, look for SSID.

3Compare the SSID of the computer and SSID of the printer.

If the SSIDs are the same, then the computer and the printer are connected to the same wireless network.

If the SSIDs are not the same, then run the utility again to set up the printer on the wireless network used by the computer.

CHECK YOUR WEP KEY OR WPA PASSPHRASE

If your wireless access point is using Wireless Equivalent Privacy (WEP) security, then the WEP key should be:

•Exactly 10 or 26 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9. or

•Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard. ASCII characters in a WEP key are case-sensitive.

If your wireless access point is using Wi-Fi Protected Access (WPA) security, then the WPA passphrase should be:

•From 8 to 63 ASCII characters. ASCII characters in a WPA passphrase are case-sensitive. or

•Exactly 64 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9.

Note: If you do not know this information, then see the documentation that came with the wireless network, or contact the person who set up your wireless network.

DISCONNECT FROM VPN SESSION

When you are connected to another network through a VPN connection, you will not be able to access the printer over your wireless network. End your VPN session and try printing again.

Troubleshooting

90