Resetting to factory settings

Resetting to factory default settings will delete all the printer settings you have previously selected.

Using the printer control panel menus

1From the printer control panel, press .

2Press the arrow buttons to scroll to Defaults, and then press .

3Press the arrow buttons to scroll to Set Defaults, and then press .

4Press the arrow buttons to scroll to Use Factory, and then press .

5When prompted to set the initial settings of your printer, make your selections using the printer control panel buttons.

Initial Setup Complete appears on the display.

Using a button combination (if you cannot read the current language)

1Turn off the printer.

Note: If you have set the Power Saver timeout in the Setup menu, then press and hold the for three seconds to turn off the printer.

2From the printer control panel, press and hold and , and then press to turn the printer on.

3Release all three buttons.

4When prompted to set the initial settings of your printer, make your selections using the printer control panel buttons.

Initial Setup Complete appears on the display.

Saving energy with Eco-Mode

The Eco-Mode feature optimizes energy efficiency and saves money.

When Eco-Mode is enabled, the printer automatically switches to the following settings:

The printer display is dimmed.

The printer changes to Power Saver mode after ten minutes.

Notes:

If you are using Eco-Mode, then the Eco-Mode settings override any changes you may make to individual settings that are part of Eco-Mode.

Eco-Mode is enabled by default.

To change the Eco-Mode setting:

1From the printer control panel, press .

2Press the arrow buttons to scroll to Device Setup, and then press .

Using the printer control panel buttons and menus

21

Page 21
Image 21
Dell V310 manual Resetting to factory settings, Saving energy with Eco-Mode, Using the printer control panel menus