Printing photos from a PictBridge-enabled digital camera

PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera without using a computer.

1Insert one end of the USB cable into the camera.

Note: Use only the USB cable that came with the camera.

2Insert the other end of the cable into the PictBridge port on the front of the printer.

Notes:

Make sure that the PictBridge-enabled digital camera is set to the correct USB mode. If the camera USB selection is incorrect, then the camera is detected as a flash drive, or an error message will be displayed on the printer control panel. For more information, see the camera documentation.

The printer reads only one memory device at a time.

Warning—Potential Damage: Do not touch the USB cable, any network adapter, any connector, or the printer in the area shown while actively printing from a PictBridge-enabled digital camera. A loss of data can occur.

3If the PictBridge connection is successful, then the following message appears on the display: PictBridge

Camera detected. Press OK to change settings.

4Press to access the PictBridge menu.

5Press the arrow buttons to select the paper size, paper type, photo size, and layout of the photos that you want to print. Press each time you make a selection.

6See the documentation for your camera to begin printing.

Note: If you insert the camera while the printer is performing another job, then wait for the job to finish before printing from the camera.

Printing

38

Page 38
Image 38
Dell V310 manual Printing photos from a PictBridge-enabled digital camera, Camera detected. Press OK to change settings