NOTE: Check the Use Secure Tunnel check box when the encryption is set to 128-bit or more
in iDRAC.
NOTE: If the iDRAC does not support remote desktop or if there is no remote desktop
password set, bVNC displays an error message that it cannot connect to the remote desktop.
Device inventory
You can view the following device inventory information of a server (iDRAC connection) or an
OpenManage Essentials — managed device.
Table 1. Device inventory
Information Description
Power State Displays the power status of the device
IP Address If this server was added individually, this value is the IP address used to connect to the
iDRAC. If this device is discovered through OpenManage Essentials, there could be
multiple IP addresses associated with the device
Service Tag The service tag associated with the device
Device Type Displays the type of device
Device Model The device model
CPUs The processor model, number of processors, and number of cores
Memory Total system memory in the server
Operating
System
The name of the operating system. This may require OpenManage Server Administrator
(OMSA) to be installed on the system
Host name The host name of the server
NOTE: Not all details are available for all managed devices.
25