Manuals / Delta / Marine Equipment / Marine Instruments

Delta DO 9704 manual Keyboard KEY, Numbers

Models: DO 9704

1 69

Download 69 pages 3.14 Kb

Page 6

			ENGLISH
	KEYBOARD
KEY	SIMBOLS LIT BESIDES	FUNCTION
	THE NUMBERS	DESCRIPTION

ON/OFF	All the symbols are lit for a few
	seconds after pressing the
	ON/OFF key.
	Complete display.

ON/OFF key. Press this key repeatedly to switch the instru- ment on or off.

The instrument has a cut-out system (Auto Power Off) which switches off automatically after about 8 minutes.

HOLD + ON/OFF The Hsymbol flashes to indicate that Auto Power Off is disabled.

+

HOLD and ON/OFF key. If this key is pressed and held down together with the ON/OFF key while switching on, for the dura- tion of the switching-on routine, the self cut-out function (Auto Power Off) is disactivated.

The battery symbol flashes at a frequency of 1 Hz.

The instrument can be switched off only by pressing the ON/OFF key.

HOLD	When this key is pressed during
	normal operation the value shown
	on the display is frozen and the
	HOLD symbol lights up; updating
	of the internal data continues.
	When the key is pressed for the
	second time the instrument
	returns to normal operation and
	the HOLD symbol goes off.

70

Image 6

Delta DO 9704 manual Keyboard KEY, Numbers

Contents

Instructions Manual Page Pressure and Temperature DATA-LOGGER English Introduction Keyboard KEY Numbers Numbers Function DescriptionSimbols LIT Besides REL Simbols LIT Besides Function Numbers Description Tom of the displaySerial Output 300 Baud P0+Press the Prog key to move on to step P1 600 Baud P1+ = data dump Hours minutes Seconds P1+Storage This parameter is used for the fol- lowing two functions Function P3+ P4+ = set year P5+ = set month P6+ = set day P7+ = set hours P8+ = set minutes P9+ Self cut-out P10 P10+To stop storage, press the Enter key Complete printing Reduced printing Data Call P11+P11 + Start-Stop KEY Simbols LIT Besides Operating modeWhen this operative Ches itself off again If the battery symbol does not fla Simbols LIT Besides Function Numbers Description Enter Restart it More than 30,000 acquisitionsAfter having taken note HOW to Measure Probe Connection Various operations Temperature Measurement Method of Using the Instrument and Warnings FUL Instrument Signals and MalfunctionsErr LOU LOW Battery Warning and Battery Replacement Storage of the Instrument Serial Interface RS 232C Type of terminal Command Type ReplyParity None Bit Stop bit Protocol Xon/Xoff Dumping data from the memory Memory clear Diagram do Printer Example of a Report Printed by the Instrument English Hardware connection Software connection with Windows OK to confirm the setting one click Mark local Echo one click 100 101 Switch on the measuring instrument 102 OK to confirm Cancel in the next window 103 Parity None 104 105 106 107 108 109 To quit running the Hyper Terminal To end receiving data from an instrumentSelect END from the pull-down sub-menu one click 110 Calibrating the Instrument do Vdc=465.5 Flow Rate Measurements Probe connection diagram Instrument do Connection of Probes to the Pressure Gauge Data Logger do113 Turbine probe for measuring flow rate SEL R100 105 110 115 Between 4 Classification of Pressure Measurements Gauge Conversion Factors and Tables = 3,386 x 103 Pa Psi = PaPsi = kPa = 2,491 x 102 Pa 118 Weight / dimensions 320 gr. / 215x73x38 mm Instrument Technical DataConnector DIN 45326 8-pole Minimum, Mean, Relative, A-B differential 120 121 Order Codes Guarantee Display blocked Examples of USE of the KeyboardSerial line 124 Pressing Data Call repeatedly gives 125 Instrument programming Sets hour Sets yearSets day 127 Date and time Enables self cut-out +Normal operating Data printing is reduced 128 Function Activation or disactivation of the serial outputActivation or disactivation of the Record function Serial output active Activation and disactivation of the storage function 130 Index 131 132 Safety EN61000-4-2, EN61010-1 level