P5+ = set month P6+ = set day | Delta DO 9704 guide

KEY	SIMBOLS LIT BESIDES
		THE NUMBERS
	P5+	= set month

P6+ = set day

ENGLISH

FUNCTION

DESCRIPTION

- P5 -

When ENTER is pressed with P5 on the display, the month may be set or changed..

The sand tkeys are used to select the desired month.

Then press PROG to move on to step P6 (the ENTER key is not active).

- P6 -

When ENTER is pressed with P6 on the display, the day may be set or changed.

The sand tkeys are used to select the desired day.

Then press PROG to move on to step P7 (the ENTER key is not active).

78

Image 14

Delta DO 9704 manual P5+ = set month P6+ = set day

Contents

Instructions Manual Page Pressure and Temperature DATA-LOGGER English Introduction Keyboard KEY Numbers Numbers Function DescriptionSimbols LIT Besides REL Serial Output Simbols LIT Besides Function Numbers DescriptionTom of the display 300 Baud P0+Press the Prog key to move on to step P1 600 Baud P1+ = data dump Hours minutes Seconds P1+Storage This parameter is used for the fol- lowing two functions Function P3+ P4+ = set year P5+ = set month P6+ = set day P7+ = set hours P8+ = set minutes P9+ Self cut-out P10 P10+To stop storage, press the Enter key Complete printing Reduced printing Data Call P11+P11 + Start-Stop KEY Simbols LIT Besides Operating modeWhen this operative Ches itself off again If the battery symbol does not fla Simbols LIT Besides Function Numbers Description Enter After having taken note Restart itMore than 30,000 acquisitions HOW to Measure Probe Connection Various operations Temperature Measurement Method of Using the Instrument and Warnings FUL Instrument Signals and MalfunctionsErr LOU LOW Battery Warning and Battery Replacement Storage of the Instrument Serial Interface RS 232C Type of terminal Command Type ReplyParity None Bit Stop bit Protocol Xon/Xoff Dumping data from the memory Memory clear Diagram do Printer Example of a Report Printed by the Instrument English Hardware connection Software connection with Windows OK to confirm the setting one click Mark local Echo one click 100 101 Switch on the measuring instrument 102 OK to confirm Cancel in the next window 103 Parity None 104 105 106 107 108 109 To quit running the Hyper Terminal To end receiving data from an instrumentSelect END from the pull-down sub-menu one click 110 Calibrating the Instrument do Vdc=465.5 Flow Rate Measurements 113 Probe connection diagram Instrument doConnection of Probes to the Pressure Gauge Data Logger do Turbine probe for measuring flow rate SEL R100 105 110 115 Between 4 Classification of Pressure Measurements Gauge Conversion Factors and Tables = 3,386 x 103 Pa Psi = PaPsi = kPa = 2,491 x 102 Pa 118 Weight / dimensions 320 gr. / 215x73x38 mm Instrument Technical DataConnector DIN 45326 8-pole Minimum, Mean, Relative, A-B differential 120 121 Order Codes Guarantee Display blocked Examples of USE of the KeyboardSerial line 124 Pressing Data Call repeatedly gives 125 Instrument programming Sets hour Sets yearSets day 127 Date and time Enables self cut-out +Normal operating Data printing is reduced 128 Function Activation or disactivation of the serial outputActivation or disactivation of the Record function Serial output active Activation and disactivation of the storage function 130 Index 131 132 Safety EN61000-4-2, EN61010-1 level