120 | Delta DO 9704 instruction

PROBE PRECISION

					GAUGE	ABSOLUTE		TEMPE-
			DIFFERENTIAL	ABSOLUTE	RELATIVE	ABSOLUTE		TEMPE-
	Rated	Maximum	RELATIVE	ABSOLUTE	rear of sensor	rear of sensor	PRECISION	RATURE	WORKING	CONNECTIONS
	pressure	over-pressure	rear of sensor	rear of sensor	connected to	connected to	20÷25°C	DRIFT	TEMP.	CONNECTIONS
	pressure	over-pressure	connected to	connected to	ambient	vacuum	20÷25°C	AT 25°C	TEMP.
			connected to	connected to	ambient	vacuum		AT 25°C
			GATE 2	vacuum	INSULATED	INSULATED		%FS • 1°C
					MEMBRANE	MEMBRANE

	10.0 mbar	20.0 mbar	TP705-10MBD				0.50% FSO	0.024	0÷60°C	∅	i= 5 mm TUBE
	20.0 mbar	40.0 mbar	TP705-20MBD				0.50% FSO	0.024	0÷60°C	∅	i= 5 mm TUBE
	50.0 mbar	100 mbar	TP705-50MBD				0.50% FSO	0.024	0÷60°C	∅	i= 5 mm TUBE
	100 mbar	200 mbar	TP705-100MBD				0.25% FSO	0.012	0÷60°C	∅	i= 5 mm TUBE

	200 mbar	400 mbar	TP705-200MBD				0.12% FSO	0.012	0÷60°C	∅	i= 5 mm TUBE
					TP704-200MBGI		0.20% FSO	0.015	0÷80°C		1/4 BSP
120	500 mbar	1000 mbar	TP705-500MBD				0.12% FSO	0.012	0÷60°C	∅	i= 5 mm TUBE
120					TP704-500MBGI		0.20% FSO	0.015	0÷80°C		1/4 BSP
	1.00 bar	2.00 bar	TP705-1BD	TP705BARO			0.12% FSO	0.012	0÷60°C	∅	i= 5 mm TUBE
					TP704-1 BGI		0.20% FSO	0.015	0÷80°C		1/4 BSP
	2.00 bar	4.00 bar	TP705-2BD				0.12% FSO	0.012	0÷60°C	∅	i= 5 mm TUBE
					TP704-2BGI	TP704-2BAI	0.40% FSO	0.04	0÷80°C		1/4 BSP
	10.0 bar	20.0 bar			TP704-10BGI	TP704-10BAI	0.40% FSO	0.04	0÷80°C		1/4 BSP
	20.0 bar	40.0 bar			TP704-20BGI	TP704-20BAI	0.40% FSO	0.04	0÷80°C		1/4 BSP
	50.0 bar	100.0 bar			TP704-50BGI	TP704-50BAI	0.40% FSO	0.04	0÷80°C		1/4 BSP
	100 bar	200 bar				TP704-100BAI	0.40% FSO	0.04	0÷80°C		1/4 BSP
	200 bar	400 bar				TP704-200BAI	0.40% FSO	0.04	0÷80°C		1/4 BSP
	500 bar	750 bar				TP704-500BAI	0.50% FSO	0.04	0÷80°C		1/4 BSP
	1000 bar	1100 bar				TP704-1000BAI	0.50% FSO	0.04	0÷80°C		1/4 BSP

N.B.: Differential probes may be used also for relative measurements (use only the socket marked +).

Differential probes may be used also for two-pole measurements (with pressure on the bottom socket marked + and pressure on the socket marked –). The BAROMETRIC probe may be used also for measurements up to 0 bar (vacuum).

ENGLISH

Image 56

Delta DO 9704 manual 120

Contents

Instructions Manual Page Pressure and Temperature DATA-LOGGER English Introduction Keyboard KEY Numbers Function Description Simbols LIT BesidesNumbers REL Serial Output Simbols LIT Besides Function Numbers DescriptionTom of the display P0+ Press the Prog key to move on to step P1300 Baud 600 Baud P1+ = data dump P1+ StorageHours minutes Seconds This parameter is used for the fol- lowing two functions Function P3+ P4+ = set year P5+ = set month P6+ = set day P7+ = set hours P8+ = set minutes P9+ Self cut-out P10+ To stop storage, press the Enter keyP10 Complete printing Reduced printing P11+ P11Data Call + Start-Stop Operating mode When this operativeKEY Simbols LIT Besides Ches itself off again If the battery symbol does not fla Simbols LIT Besides Function Numbers Description Enter After having taken note Restart itMore than 30,000 acquisitions HOW to Measure Probe Connection Various operations Temperature Measurement Method of Using the Instrument and Warnings Instrument Signals and Malfunctions ErrFUL LOU LOW Battery Warning and Battery Replacement Storage of the Instrument Serial Interface RS 232C Command Type Reply Parity None Bit Stop bit Protocol Xon/XoffType of terminal Dumping data from the memory Memory clear Diagram do Printer Example of a Report Printed by the Instrument English Hardware connection Software connection with Windows OK to confirm the setting one click Mark local Echo one click 100 101 Switch on the measuring instrument 102 OK to confirm Cancel in the next window 103 Parity None 104 105 106 107 108 109 To end receiving data from an instrument Select END from the pull-down sub-menu one clickTo quit running the Hyper Terminal 110 Calibrating the Instrument do Vdc=465.5 Flow Rate Measurements 113 Probe connection diagram Instrument doConnection of Probes to the Pressure Gauge Data Logger do SEL R 100 105 110 115Turbine probe for measuring flow rate Between 4 Classification of Pressure Measurements Gauge Conversion Factors and Tables Psi = Pa Psi = kPa= 3,386 x 103 Pa = 2,491 x 102 Pa 118 Instrument Technical Data Connector DIN 45326 8-poleWeight / dimensions 320 gr. / 215x73x38 mm Minimum, Mean, Relative, A-B differential 120 121 Order Codes Guarantee Examples of USE of the Keyboard Serial lineDisplay blocked 124 Pressing Data Call repeatedly gives 125 Instrument programming Sets year Sets daySets hour 127 Enables self cut-out + Normal operatingDate and time Data printing is reduced 128 Activation or disactivation of the serial output Activation or disactivation of the Record functionFunction Serial output active Activation and disactivation of the storage function 130 Index 131 132 Safety EN61000-4-2, EN61010-1 level