ENGLISH

1-3 Setting the Room EQ Setup

Select the setting of an Equalizer that has been set with Auto Setup or Manual EQ.

1

 

Select “Room EQ Setup” at the Auto Setup / Room EQ

 

Menu.

 

 

*AutoSet/RoomEQ

 

(Remote control unit)

Room EQ Setup

2

 

 

Display the Room EQ Setup screen.

 

 

 

(Remote control unit)

 

 

 

*Room EQ Setup

 

 

SurMode:ALL

1-4 Setting the Direct Mode

Perform the ON/OFF setting of Room EQ when the surround mode is Direct or Pure Direct.

1

 

Select “Direct Mode Setup” at the Auto Setup / Room

 

EQ Menu.

 

 

 

*AutoSet/RoomEQ

 

(Remote control unit)

Direct

Mode

2

 

 

 

Display the Direct Mode Setup screen.

 

 

 

(Remote control unit)

 

 

 

 

*Direct

Mode

 

 

Room EQ

: OFF

3

Select All or Assign.

3

Select ON or OFF.

4

Enter the setting.

•

All

: The Equalizer to all Surround mode is set as once.

 

The Auto Setup / Room EQ

 

•

Assign

: The Equalizer to each surround mode is to set individually.

 

 

 

Menu reappears.

 

(Remote control unit)

 

 

 

(Remote control unit)

 

(Remote control unit)

 

 

 

 

 

 

4

 

When the All is selected and press the ENTER button,

 

 

 

display the Select the EQ Curve screen.

 

 

 

 

Select the Equalizer setting.

 

 

 

 

•

OFF

: The Equalizer is not used.

 

 

 

(Remote control unit)

•

Normal

: Adjusts the frequency response of all

 

 

 

 

 

speakers suitable for general surround

 

 

 

 

 

 

 

 

 

 

 

 

system.

 

 

 

 

•

Front

: Adjusts the characteristics of each

 

 

 

 

 

 

speaker to the characteristics of the front

*Room

EQ Setup

 

 

 

 

RoomEQ

Normal

 

 

 

 

speakers.

 

 

 

 

•

Flat

: Adjusts the frequency response of all speakers flat.

 

This is suitable for music reproduction like ITU-R speaker setting.

•Manual : Selects the setting value that was set in the Manual EQ setup.

NOTES:

•The Equalizer setting of Normal, Front and Flat can be selected after performing the Auto Setup.

•When the speaker set as “None” with the Auto Setup is change to on manually, the equalizer of “Normal”, “Front” and “Flat” cannot be used.

•The Equalizer setting can be selected by SURROUND PARAMETER button in Main unit or Remote control unit.

•When headphone is connected, the Room EQ cannot be used.

5

Enter the setting.

The Auto Setup / Room EQ Menu reappears.

(Remote control unit)

1-5 Setting the MIC Input Select

•Use this setting when using a microphone other than the included one for measurements when performing the auto setup procedure.

•The microphone included with the AVR-2805 is a measurement microphone designed specifically for use

during the auto setup procedure. Select “Mic” and connect the included microphone to the “SETUP MIC” mini-jack. When conducting the auto setup procedure using a separate high performance condenser microphone for measurements, select “V.AUX L” and connect the microphone to the “V.AUX Lch” pin jack. Please ask the DENON Authorized Service Center about the usable microphone other than the included one.

1

 

Select “Mic Input Select” at the Auto Setup / Room EQ

 

 

Menu.

 

 

 

 

 

*AutoSet/RoomEQ

 

 

(Remote control unit)

Mic

In Select

 

 

 

 

 

 

2

 

Display the Mic Input Select

3

Select the Mic input jack or

 

screen.

 

V.AUX L jack.

 

(Remote control unit)

 

 

(Remote control unit)

 

 

 

 

 

 

4

 

Enter the setting.

 

 

 

 

The Auto Setup / Room EQ

 

 

 

 

Menu reappears.

 

 

 

 

(Remote control unit)

 

 

 

 

 

 

 

 

 

*Mic In Select

 

 

 

 

 

Mic

16