ENGLISH
Dolby Digital mode (only with digital input) and DTS Surround mode (only with digital input)
1 | Select the input source. | 2 | |
| Playback with a digital input |
|
|
| q Select an input source set to digital |
|
|
| (COAXIAL/OPTICAL) (see page 22). |
|
|
FUNCTION
3 | Play a program source with the | , | mark. |
Light • The Dolby Digital indicator lights when playing Dolby Digital sources.
Light | • The DTS indicator lights when playing DTS sources. |
|
Light • Press the SURROUND BACK button. |
| |
| Lights when the Surround Back CH is on. |
|
Light |
|
|
| (Main unit) | (Remote control unit) |
(Main unit) | (Remote control unit) |
wSet the input mode to “AUTO” or “DTS”.
MODE
(Main unit)(Remote control unit)
4 | Display the surround parameter menu. | |
| (Main unit) | (Remote control unit) |
NOTE: The display on the screen differs depending on whether you are performing the operation from the main unit or the remote control unit.
2 Selectmode. the STANDARD (Dolby/DTS Surround)
SELECT
(Main unit) | (Main unit) | (Remote control unit) |
|
|
|
3
3
2
5
4, 7
6
6
5 | 7 | |
3 | ||
|
5 | Select the various parameters. |
| (Main unit) | (Remote control unit) |
6 | Adjust the parameter settings. | |
| SELECT |
|
| (Main unit) | (Remote control unit) |
2Dialogue Normalization
The dialogue normalization function is activated automatically when playing Dolby Digital program sources.
Dialogue normalization is a basic function of Dolby Digital which automatically normalizes the dialog level (standard level) of the signals which are recorded at different levels for different program sources, such as DVD, DTV and other future formats that will use Dolby Digital.
These contents can be verified with the STATUS and ON SCREEN button.
Display
Dial . Norm
Offset - 4dB
7 | When the surround parameters are set using |
the buttons on the main unit, stop operating |
buttons after completing the settings. The settings are automatically finalized and the normal display reappears after several seconds.
When the settings are made using the buttons on the remote control unit, press the “ENTER” or “SURROUND PARAMETER” button to finish.
The number indicates the normalization level when the currently playing program is normalized to the standard level.
NOTE:
•When “Default” is selected and the CURSOR left button is pressed, “CINEMA EQ.” and “D.COMP.” are automatically turned off, “LFE” is reset, and the tone is set to the default value.
42