Denon AVR-2805 manual 6

ENGLISH

Connecting the video components equipped with S-Video jacks

•When making connections, also refer to the operating instructions of the other components.

•A note on the S input jacks

The input selectors for the S inputs and Video inputs work in conjunction with each other.

•The AVR-2805 is equipped with a function for converting video signals.

•The signal connected to the S-Video signal terminal is output to the composite video and component video monitor out terminals.

•The REC OUT terminals have no conversion function, so when recording only connect the S-Video terminals.

Connecting the video component equipped with Color Difference (Component - Y, PR/CR, PB/CB) Video jacks

•When making connections, also refer to the operating instructions of the other components.

•The signals input to the color difference (component) video jacks are not outputs to the VIDEO output jack (yellow) or the S-Video output jack.

•Some video sources with component video outputs are labeled Y, CB, CR, or Y, Pb, Pr, or Y, R-Y, B-Y. These terms all refer to component video color difference output.

•The function assigned to the component video input can be changed at the system setup. For details, see “Setting the Video Input Mode”. (See page 23)

	Connecting a monitor TV
DVD player or video disc player (VDP)	MONITOR OUT
	• Connect the TV’s S video input (S-VIDEO INPUT) to the S-VIDEO
S-VIDEO	MONITOR OUT jack using a S jack connection cord.
OUT

COMPONENT	DVD player
VIDEO OUT
Y CB CR

Connecting a DVD player

DVD IN jacks

• Connect the DVD player’s color difference (component) video output jacks (COMPONENT

VIDEO OUTPUT) to the COMPONENT VIDEO-1 IN jack using 75 Ω/ohms coaxial video pin-

Connecting a DVD player or a video disc player (VDP)

DVD

•Connect the DVD player’s S-Video output jack to the S- VIDEO DVD IN jack using a S-Video connection cord.

•VDP can be connected to the VDP jacks in the same way.

•It is also possible to connect a video disc player, DVD player, video camcorder, game machine, etc., to the V.AUX jacks.

S-VIDEO

IN

Monitor TV

TV or satellite broadcast tuner

S-VIDEO

OUT

Connecting a TV or DBS tuner

• Connect the TV’s or DBS tuner’s S video output jack (S-VIDEO OUTPUT) to the S-VIDEOTV or DBS IN jack using an S-Video connection cord.

COMPONENT

VIDEO IN

Y CB CR

plug cords.

• In the same way, another video source with component video outputs such as a TV/DBS

tuner, etc., can be connected to the VIDEO-2 color difference (component) video jacks.

Monitor TV

Connecting a monitor TV

MONITOR OUT jack

• Connect the	TV’s color difference (component) video input jacks
(COMPONENT VIDEO INPUT) to the COMPONENT MONITOR OUT
jack using 75	Ω/ohms coaxial video pin-plug cords.

S-VIDEO	Video deck 1
OUT IN

Connecting the video decks

• Connect the video deck’s S output jack (S-OUT) to the S-VIDEO

VCR-1 IN jack and the video deck’s S input jack (S-IN) to the

S-VIDEOVCR-1 OUT jack using S-Video connection cords.

• Connect the video deck’s S output jack (S-OUT) to the S-VIDEO

VCR-2 IN jack and the video deck’s S input jack (S-IN) to the

S-VIDEOVCR-2 OUT jack using S-Video connection cords.

• The color difference input jacks may be indicated differently on some TVs, monitors

or video components (“CR, CB and Y”, “R-Y, B-Y and Y”, “Pr, Pb and Y”, etc.). For

details, carefully read the operating instructions included with the TV or other

component.

MONITOR OUT jacks

The AVR-2805 is equipped with a function for up-converting video signals. Because of this, the AVR-2805’s MONITOR OUT jack can be connected to the monitor (TV) with a set of cables offering a higher quality connection, regardless of how the player and the AVR-2805’s video input jacks are connected.

Generally speaking, connections using the component video jacks offer the highest quality playback, followed by connections using the S-Video jacks, then connections using the regular video jacks (yellow).

S-VIDEO	Video deck 2
OUT IN

Connect the components’ audio inputs and outputs as described. (See page 5)

The Video Conversion Function

With the AVR-2805, the Video signal and the S-video signal which were inputted are converted mutually. And also the Video signal and the S-Video signal which were inputted are converted into a higher quality.

This unit’s input jacks The flow of the	This unit’s output jacks
this unit’s internal
signals.
(Color Diffrence Video jack)	(Color Diffrence Video jack)
(S-Video jack)	(S-Video jack)
(Video jack)	(Video jack)

NOTE:

Down-converting from the component video signal to the S- Video and composite video signal is not possible, so when not using the component video monitor output terminal connect the player using the S-Video or composite video input terminal.

Cautions on the video conversion function:

When the component video terminals are used to connect the AVR-2805 with a TV (or monitor, projector, etc.) and the video (yellow) or S video terminals are used to connect the AVR-2805 with a VTR, depending on the combination of the TV and VTR the picture may flicker in the horizontal direction, be distorted, be out of sync or not display at all when playing video tapes.

If this happens, connect a commercially available video stabilizer, etc., with a TBC (time base corrector) function between the AVR-2805 and the VTR, or if your VTR has a TBC function, turn it on.

6