6

Set the various surround parameters.

 

SELECT

7

When the surround parameters are set using

the buttons on the main unit, stop operating

buttons after completing the settings. The settings are automatically finalized and the

ENGLISH

DTS NEO:6 mode

•Surround playback can be performed for the analog input and PCM digital input 2-channel signals.

 

CH SEL

 

ENTER

(Main unit)

(Remote control unit)

normal display reappears after several seconds.

When the settings are made using the buttons on the remote control unit, press the “ENTER” or “SURROUND PARAMETER” button to finish.

1

 

The

DTS

NEO:6

1

Cinema

or

Music

mode can be chosen

 

directly

by

pressing

 

the

CINEMA

or

 

MUSIC button on the

 

remote

control

unit

If the setting ends, press the “ENTER” or “SURROUND PARAMETER” button.

NOTE:

•There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3 STEREO). The AVR- 2805 sets the mode automatically according to the types of speakers set during the system setup process (page 18).

Surround parameters q

Pro Logic IIx and Pro Logic II Mode:

Select one of the modes (“Cinema”, “Music”, “Pro Logic” or “Game”).

•

Cinema

 

This mode is for use with stereo television shows and all programs encoded in Dolby Surround.

•

Music

 

This mode is recommended as the standard mode for auto sound music systems (no video), and is optional

 

for A/V systems.

 

Panorama Control:

 

This mode extends the front stereo image to include the surround speakers for an exciting “wraparound”

 

effect with side wall imaging.

 

Select “OFF” or “ON”.

 

Dimension Control:

 

This control gradually adjust the soundfield either towards the front or towards the rear.

 

The control can be set in 7 steps from 0 to 6.

 

Center Width Control:

 

This control adjust the center image so it may be heard only from the center speaker; only from the

 

left/right speakers as a phantom image; or from all three front speakers to varying degrees.

 

The control can be set in 8 steps from 0 to 7.

 

 

3, 5

1, 4, 6

1

Select the DTS NEO:6 mode.

 

 

 

SELECT

 

 

(Main unit)

(Main unit)

(Remote control unit)

•The mode switches as shown below each time the button is pressed.

DOLBY PLIIx DTS NEO:6

2

Play a program source.

3

Set the surround parameter

mode.

 

during playback in the

 

DTS NEO:6 mode.

 

5

 

3, 7

4, 6

4, 6

5

7

 

NOTE:

•When “Default” is selected and the CURSOR left button is pressed, “MODE” and “TONE” are automatically reset to the default values and “CINEMA EQ” is set to “OFF”.

5

Select the various parameters.

•

Pro Logic

 

This mode offers the same robust surround processing as original Pro Logic in case the source contents

 

is not of optimum quality.

•

Game

 

This mode for playing games.The game mode can only be used with 2-channel audio sources.

Surround parameters w

DTS NEO:6 Mode:

•

Cinema

 

This mode is optimum for playing movies. Decoding is performed with emphasis on separation

 

performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources.

 

This mode is effective for playing sources recorded in conventional surround formats as well, because the

 

in-phase component is assigned mainly to the center channel (C) and the reversed phase component to

 

the surround (SL, SR and SB channels).

•

Music

 

This mode is suited mainly for playing music. The front channel (FL and FR) signals bypass the decoder

 

and are played directly so there is no loss of sound quality, and the effect of the surround signals output

(Main unit)

(Remote control unit)

4

SELECT

Select the play mode.

 

(Main unit)

 

(Main unit)

(Remote control unit)

6

Adjust the parameter settings.

 

SELECT

 

 

(Main unit)

(Remote control unit)

7

When the surround parameters are set using

the buttons on the main unit, stop operating

buttons after completing the settings. The settings are automatically finalized and the normal display reappears after several seconds.

from the center (C) and surround (SL, SR and SB) channels add a natural sense of expansion to the sound

field.

CENTER IMAGE (0.0 to 1.0: default 0.3):

The center image parameter for adjusting the expansion of the center channel in the DTS NEO:6 MUSIC

mode has been added.

(Remote control unit)

 

 

 

 

 

 

When the settings are made using the buttons

 

 

 

Display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

on the remote control unit, press the “ENTER”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*Surr

Parameter

 

 

 

*Surr

Parameter

 

 

 

 

or “SURROUND PARAMETER” button to

 

 

 

MODE:

Cinema

 

 

 

MODE:

Music

 

 

 

 

finish.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

41