ENGLISH

3

Setting the Input Setup

1

 

At the System Setup Menu select “Input Setup”.

 

 

 

 

*System Setup

 

(Remote control unit)

Input Setup

 

 

2

 

Display the Input Setup Menu screen.

 

 

 

(Remote control unit)

 

3-1 Setting the Digital In Assignment

•This setting assigns the digital input jacks of the AVR-2805 for the different input sources.

1

 

At the Input Setup Menu select “Digital In Assign”.

 

 

 

 

*Input

Setup

 

(Remote control unit)

Digital

In

2

 

 

 

 

Display the Digital Inputs screen.

 

 

 

(Remote control unit)

 

 

 

 

 

*Digital

In

 

 

CD

:

COAX1

3

Select the digital input jack to be assigned to

4

Enter the setting.

the input source.

The Input Setup Menu

reappears.

q Select the input source

(Remote control unit)

3-2 Setting the Ext. In Subwoofer Level

•Set the method of playback of the analog input signal connected to the Ext. In Subwoofer.

1

 

Select “Ext. In Subwoofer Level” at the Input Setup

 

Menu.

 

 

*Input Setup

 

(Remote control unit)

Ext . In SW Lev .

2

 

 

Display to the Ext. In Subwoofer Level screen.

 

 

 

(Remote control unit)

 

 

 

*Ext . In SW Lev .

3

 

SW Lev . : +15dB

 

Select the desired setting.

 

 

 

 

Select according to the specifications of the player being used. Also refer to the

 

 

player’s operating instructions.

 

(Remote control unit)

+15 dB (default) recommended. (0, +5, +10 or +15 can be selected.)

 

 

4

 

Enter the setting.

 

The Input Setup Menu reappears.

(Remote control unit)

(Remote control unit)

w Select the digital input jack

(Remote control unit)

Select “OFF” for input sources for which no digital input jacks are used.

If “Yes” is selected for “Default”, the settings are automatically reset to the default values.

NOTES:

•The OPTICAL 3, 4 jacks on the AVR-2805’s rear panel are equipped with an optical digital output jack for recording digital signals on a CD recorder, MD recorder or other digital recorder. Use this for digital recording between a digital audio source (stereo - 2 channel) and a digital audio recorder.

•Do not connect the output of the component connected to the OPTICAL 3, 4 OUT jack on the AVR-2805’s rear panel to any jack other than the OPTICAL 3, 4 IN jack.

•“PHONO” and “TUNER” cannot be selected on the Digital In Assignment.

22