ENGLISH

5-2 Setting the Zone2 Vol. Level

Set the Zone2 pre-out output level adjustment.

1

 

At the Option Setup Menu select “Zone2 Vol. Level”.

 

 

 

 

*Option Setup

 

(Remote control unit)

Zone2 Vol . Lev .

2

 

 

Display the Zone2 Vol. Level screen.

 

 

 

(Remote control unit)

 

5-3, 5-4 Setting the Trigger Out Setup

•There are two 12V DC Trigger Out outputs on the rear panel that can be used to control other devices with compatible trigger inputs.

•Set the Trigger Out output 1 for the different input sources.

1

 

Select “Trigger Out 1 Setup” at the Option Setup Menu.

 

 

 

 

 

*Option

Setup

 

(Remote control unit)

Trigger

Out 1

 

 

 

2

 

Display to the Trigger Out 1 Setup screen.

 

 

 

 

(Remote control unit)

 

 

3

Select the desired setting.

Variable:

The level can be adjusted freely using the buttons on the remote control unit.

(Remote control unit) 0 dB, –40 dB:

The output level is fixed at the set level and the volume can no longer be adjusted.

NOTE:

•When “ZONE2” is selected at System Setup Menu “5-1. Power Amp Assign”, the Zone2 vol. Level is all set to “Variable” including preout level and this menu is not displayed.

*Zone2 Vol . Lev .

Variable

 

 

*Trigger

Out 1

 

 

ZONE :

MAIN

3

Select the Zone (MAIN or Zone2).

 

 

 

 

(Remote control unit)

 

 

4

q Select the input source.

wSelect “ON” or “OFF”.

4

Enter the setting.

The Option Setup Menu reappears.

(Remote control unit)

 

(Remote control unit)

 

(Remote control unit)

5

Enter the setting

The Option Setup Menu reappears.

(Remote control unit)

Set the Trigger out 2 Setup in the same way.

26