ENGLISH

2-3 Setting the Channel Level

•Use this setting to adjust so that the playback level between the different channels is equal.

•From the listening position, listen to the test tones produced from the speakers to adjust the level.

•The level can also be adjusted directly from the remote control unit. (For details, see page 39.)

1

 

Select “Channel Level” at the Speaker Setup Menu.

 

 

 

 

 

*Speaker

Setup

 

(Remote control unit)

Channel

Level

 

 

 

2

 

Display the Channel Level screen.

 

 

 

 

(Remote control unit)

 

 

6

a. When the “Auto” mode is selected:

 

 

 

 

 

 

Test tones are automatically emitted from

each

 

 

 

 

 

speaker.

 

 

 

 

 

 

 

 

 

 

 

The test tones are emitted from each speaker in the

 

 

 

 

 

following order, at 4-second intervals the first time

 

 

 

 

(Remote control unit)

and second time around, 2-second intervals the third

 

 

 

 

 

time around and on:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1spkr

 

Flashing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SB

 

 

Example: When the volume is set to

 

 

 

 

 

 

 

 

 

 

FL

C

FR

SR

SBR

SBL

SL

SW

–11.5

dB

while

the test

 

 

 

 

 

2spkrs

 

 

tone

is

being

produced

 

 

 

 

 

 

 

 

 

from the Front Lch speaker

When the surround back speaker setting is set to “1spkr” for “Speaker Configuration”, this is set to “SB”.

Use the CURSOR left and right buttons to adjust all the

speakers to the same volume.

The volume can be adjusted between –12 dB and +12 TestTone Auto

*Channel

Level

T . Tone:

Auto

dB in units of 0.5 dB.

FL : - 11 . 5dB

3

 

Select the mode.

 

 

Select “Auto” or “Manual”.

 

 

 

*Channel

Level

 

(Remote control unit)

T . Tone:

Auto

 

 

 

•Auto:

Adjust the level while listening to the test tones produced automatically from each speaker.

•Manual:

Select the speaker from which you want to produce the test tone to adjust the level.

Example: When the “Auto” mode is selected

b. When the “Manual” mode is selected :

 

qSelect the speaker.

wAdjust all the speakers to the same

 

volume.

(Remote control unit)

(Remote control unit)

7

Enter the setting.

The “Channel Level” screen reappears.

4

 

Select “Test Tone Start”.

 

 

 

 

*Channel Level

 

(Remote control unit)

Tone Start:Yes

5

 

 

Select “Yes”.

 

 

 

(Remote control unit)

 

(Remote control unit)

To cancel the settings, press the CURSOR down to select “Level Clear” and “Yes” on the “Channel Level” screen, then make the settings again.

When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affect all surround modes. Consider this mode a Master Channel Level adjustment mode.

After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then activate the individual surround modes and adjust channel levels that will be remembered for each of those modes. Then, whenever you activate a particular surround sound mode, your preferred channel level adjustments for just that mode will be recalled. Check the instructions for adjusting channel levels within each surround mode. (See page 39)

You can adjust the channel levels for each of the following surround modes: PURE DIRECT/DIRECT, STEREO, DOLBY/DTS SURROUND, 5/7 CH STEREO, WIDE SCREEN, SUPER STADIUM, ROCK ARENA, JAZZ CLUB, CLASSIC CONCERT, MONO MOVIE, VIDEO GAME, MATRIX and VIRTUAL.

20