3-3 Setting the Component In Assign

•This setting assigns the color difference (component) video input jacks of the AVR-2805 for the different input sources.

1

 

Select “Component In Assign” at the Input Setup

 

Menu.

 

 

 

 

*Input

Setup

 

(Remote control unit)

Component

In

2

 

 

 

 

Display the Component In Assign screen.

 

 

 

(Remote control unit)

 

 

 

 

 

*Component In

 

 

DVD

:

V1

3

Select the component (Y, PB/CB and PR/CR) video input terminal to be assigned to the input source.

qSelect the source selection. wSelect the component video input terminal.

Select “NONE” for sources for which the component (Y, PB/CB and PR/CR) video input is not to be used.

 

When the default, “Yes”, is selected,

(Remote control unit)

the settings are reset to the factory

defaults.

 

(Remote control unit)

4

 

Enter the setting.

 

 

The Input Setup Menu reappears.

 

(Remote control unit)

 

 

 

3-4 Setting the Video Input Mode

 

1

 

Select “Video Input Mode” at the Input Setup Menu.

 

 

 

 

*Input

Setup

 

(Remote control unit)

Video

In Mode

2

 

 

 

Display the Video Input Mode screen.

 

 

 

(Remote control unit)

 

 

 

 

*Video

In Mode

 

 

DVD

: Auto

ENGLISH

3

q Select the input source for wSelect the mode as below.

which you want to set the Video

 

 

 

 

 

 

 

Input Mode.

 

AUTO

 

COMPONENT

 

Svideo

 

Video

 

 

 

 

 

 

 

 

 

 

 

The details in each mode are as follows.

(Remote control unit)

(Remote control unit)

AUTO:

When there are multiple input signals, the input signals are detected and the input signal

 

to be output from the video monitor output terminal is selected automatically in the

 

following order: component video, S-Video, composite video.

Component:

The signal connected to the component video terminal is always played.

 

Video conversion is not conducted, so no image is output from the monitor output terminal

 

when there is no input signal to the component terminal.

S-Video:

The signal connected to the S-Video terminal is always played.

 

The S-Video input signal is converted and output from the composite and component

 

monitor output terminal.

 

Video:

The signal connected to the composite video terminal is always played.

 

The composite video input signal is up-converted and output from the S-Video and

 

component monitor output terminals.

NOTE:

Down-converting from the component video signal to the S-Video and composite video signal is not possible, so when not using the component video monitor output terminal connect the player using the S-Video or composite video input terminal.

Cautions on the video conversion function:

When the component video terminals are used to connect the AVR-2805 with a TV (or monitor, projector, etc.) and the video (yellow) or S video terminals are used to connect the AVR-2805 with a VTR, depending on the combination of the TV and VTR the picture may flicker in the horizontal direction, be distorted, be out of sync or not display at all when playing video tapes.

If this happens, connect a commercially available video stabilizer, etc., with a TBC (time base corrector) function between the AVR-2805 and the VTR, or if your VTR has a TBC function, turn it on.

4

Enter the setting.

The Input Setup Menu reappears.

(Remote control unit)

23