5CONNECTIONS
ENGLISH
Connecting the video components
•Do not plug in the AC cord until all connections have been completed.
•Be sure to connect the left and right channels properly (left with left, right with right).
•Insert the plugs securely. Incomplete connections will result in the generation of noise.
•Use the AC OUTLET for audio equipment only. Do not use them for hair driers, etc.
•Note that binding pin plug cords together with AC cords or placing them near a power transformer will result in generating hum or other noise.
•Noise or humming may be generated if a connected audio equipment is used independently without turning the power of this unit on. If this happens, turn on the power of the this unit.
•To connect the video signal, connect using a 75 Ω/ohms video signal cable cord. Using an improper cable can result in a drop in video quality.
•When making connections, also refer to the operating instructions of the other components.
•The
•The signal connected to the video signal terminal is output to the
•The REC OUT terminals have no conversion function, so when recording only connect the video terminals.
TV or DBS tuner | Connecting a TV or DBS tuner |
Connecting the audio components
• When making connections, also refer to the operating instructions of the other components.
AUDIO VIDEO
OUT
R L OUT
R L
TV or DBS
• Connect the TV’s or DBS tuner’s video output jack (VIDEO OUTPUT) to the IN jack using a 75 Ω/ohms video coaxial pin plug cord.
•Connect the TV’s or DBS tuner’s audio output jacks (AUDIO OUTPUT) to the using pin plug cords.
VIDEO (yellow) TV or DBS
AUDIO TV or DBS IN jacks
|
| Connecting a CD player | |||
OUTPUT | CD player |
|
| ||
Connect the CD player’s analog | |||||
R | L | ||||
|
| output | jacks | (ANALOG | |
R | L | OUTPUT) to this unit’s CD jacks | |||
using pin plug cords. |
| ||||
|
|
| |||
Connecting the AC OUTLET
AC OUTLET
• SWITCHED
(total capacity – 100 W)
The power to these outlets is turned on and off in conjunction with the POWER operation switch on the main unit, and when the power is switched between on and standby from the remote control unit. No power is supplied from these outlets when this unit’s power is
AUDIO | VIDEO | DVD player or video disc player (VDP), etc. | |
R | OUT | OUT | |
L | |||
R | L |
| Connecting a DVD player or a video disc player (VDP) |
|
|
| |
|
|
| DVD |
Turntable (MM cartridge)
Connecting a turntable
Connect the turntable’s output cord to the AVR- 2805’s PHONO jacks, the L (left) plug to the L jack, the R (right) plug to the right jack.
NOTE:
This unit cannot be used with MC cartridges directly. Use a separate head amplifier or
If humming or other noise is generated when the ground wire is connected, disconnect the ground wire.
at standby. Never connect equipment whose total capacity is above
100W.
NOTE:
Only use the AC OUTLET for audio equipment. Never use them for hair driers, TVs or other electrical appliances.
Connecting the
Use these jacks if you wish to connect external power amplifier(s) to increase the power of the front, center and surround sound channels, or for connection to powered loudspeakers.
• Connect the video disc player’s video output jack (VIDEO OUTPUT) to the VIDEO (yellow) DVD IN jack using a 75 Ω/ohms video coaxial pin plug cord.
•Connect the video disc player’s analog audio output jacks (ANALOG AUDIO OUTPUT) to the AUDIO DVD IN jacks using pin plug cords.
•VDP can be connected to the VDP jacks in the same way.
Ground wire
R 
RL
R
RL 
RL 
R
R L
To use Surround back with one speaker, connect the speaker to SURR. BACK L CH.
R | VIDEO |
| |
L | IN |
R |
|
L |
|
L |
|
R |
|
R |
|
L |
|
R | L |
| R L |
Monitor TV
MONITOR OUT
•Connect the TV’s video input jack (VIDEO INPUT) to the VIDEO MONITOR OUT jack using a 75 Ω/ohms video
coaxial pin plug cord.
Note on connecting the digital input jacks
• Only audio signals are inputs to the digital input jacks. For details. (See page 5)
CD player or other component equipped with digital output jacks
OPTICAL COAXIAL
OUTPUT
MD recorder, CD recorder or other component equipped with digital input/output jacks
INPUT OUTPUT
OPTICAL
Connecting the DIGITAL jacks
R 
L 
R 
L
R L R L
INPUT OUTPUT
Route the connection cords, etc., in |
|
such a way that they do not obstruct |
|
the ventilation holes. | Power supply cord |
| |
TRIGGER OUT | AC 230V, 50Hz |
Turn the DC 12V voltage on and off for the individual functions. For details, see “Setting the Trigger Out Setup”. (See page 26)
| NOTE: |
| If humming noise is generated by a |
CD recorder or Tape deck | tape deck, etc., move the tape deck |
away. |
R |
| R | Video deck 2 |
L | L | ||
R | L | R | L OUT IN |
| OUT |
| IN |
| AUDIO | VIDEO | |
R |
| R | Video deck 1 |
L | L | ||
R | L | R | L OUT IN |
| OUT |
| IN |
| AUDIO | VIDEO | |
Connecting a video decks
•There are two sets of video deck (VCR) jacks, so two video decks can be connected for simultaneous recording or video copying.
Video input/output connections:
Use these for connections to audio equipment with digital output. Refer |
| Connecting a tape deck |
| |
to “Setting the Digital in Assignment”. (See page 22) |
| Connections for recording: | ||
|
|
| Connect the tape deck’s recording input jacks (LINE IN or REC) to this unit’s | |
NOTES: |
| tape recording (CDR/TAPE OUT) jacks using pin plug cords. | ||
• | Use 75 Ω/ohms cable pin cords for coaxial connections. |
| Connections for playback: | |
• | Use optical cables for optical connections, removing the cap before |
| ||
| Connect the tape deck’s playback output jacks (LINE OUT or PB) to this | |||
| connecting. |
| ||
|
| unit’s tape playback (CDR/TAPE IN) jacks using pin plug cords. | ||
|
|
| ||
• Connect the video deck’s video output jack (VIDEO OUT) to the VIDEO (yellow)
VIDEO (yellow)
Connecting the audio output jacks
•Connect the video deck’s audio output jacks (AUDIO OUT) to the AUDIO
Connect the second video deck to the
5