ENGLISH

5-7 Protecting the setting

The system setup settings can be locked so that they cannot be changed easily.

1

Select “Setup Lock” at the Option Setup Menu.

 

 

*Option

Setup

(Remote control unit)

Setup Lock

 

 

2

Display the Setup Lock screen.

 

(Remote control unit)

 

 

3

Select “ON”, to lock the system setup settings.

 

(Remote control unit)

*Setup

Lock

 

ON/OFF:

OFF

4

Press the “ENTER”button to finalize the setting and exit the Option setup mode.

When the setup lock function is activated, the settings listed below cannot be

changed, and “SETUP LOCKED” is displayed when related buttons are operated.

After completing system setup

This button can be pressed at any time during the system setup process to complete the process.

1

Press the SYSTEM SETUP button at the System Setup Menu.

The changed settings are entered and the on-screen display turns off.

(Remote control unit)

On-screen display signals

 

Signals input to the AVR-2805

 

On-screen display signal output

 

 

 

 

 

 

 

VIDEO signal

S-video signal

Video signal output to

Video signal output to

Video signal output to Color

 

input jack

VIDEO MONITOR OUT

S-Video MONITOR

Difference (Component) Video

 

input jack

 

(yellow)

jack (yellow)

OUT jack

MONITOR OUT jack

 

 

 

 

 

 

 

 

 

1

 

E

E

C

C

C

 

 

 

 

 

 

 

2

 

C

E

C

C

C

 

 

 

 

 

 

 

3

 

E

C

C

C

C

 

 

 

 

 

 

 

4

 

C

C

E

C

C

 

 

 

 

 

 

 

(C: Signal

E: No signal)

(C: On-screen signals output E: On-screen signals not output)

NOTE:

• When a component video signal is input and when the “Video Input Mode” is set to the component fixed

(Remote control unit)

System setup settings

• Surround parameter settings

• Tone control settings

• Channel level settings (including test tones)

mode at Input setup, the on-screen display is only displayed when the System Setup, Surround

Parameters and On Screen buttons are operated.

To unlock, press the System Setup button again and display the Setup Lock screen, then select “OFF” and press “ENTER”.

System setup is complete. Once these settings are made, there is no need to change them unless different AV components are connected or the speakers are repositioned.

28