3. Video deck (VCR) system buttons

4. Monitor TV (TV), digital broadcast satellite

 

(DBS) tuner and cable (CABLE) system buttons

POWER

: Power on/standby

(ON/SOURCE)

 

Channel +, – : Channels

1: Play

ENGLISH

Learning function

If your AV component is not a DENON product or if it cannot be operated using the preset memory, it can be controlled with the included remote control unit by storing its remote control signals in the remote control unit. For some remote control signals it is not possible to “learn” the signals or the device will not operate properly. In such cases use the remote control unit included with the device to operate it.

2

: Stop

6,7 : Manual search

 

(forward and reverse)

3

: Pause

 

 

 

 

POWER

: Power on/standby

 

 

 

 

(ON/SOURCE)

 

 

 

 

 

0~9, +10

: Channels

 

 

 

 

TV/VCR

: Switch between TV and

 

 

 

 

 

video player

 

 

 

 

TV VOL +, –

: Volume up/down

 

 

 

 

CHANNEL

: Switch channels

 

 

 

 

+, –

 

 

 

 

 

 

 

 

 

MENU

: Menu

 

 

 

 

DISPLAY

: Switch display

 

 

 

 

RETURN

: Return

 

 

 

 

 

 

 

 

•, ª, 0, 1

: Cursor up, down, left

 

 

 

 

 

and right

 

 

 

 

ENTER

: Enter

 

 

 

 

 

 

 

 

 

 

NOTES:

•For this CD, CDR, MD and TAPE components, buttons can be operated in the same way as for Denon audio components.

•The television can be operated in the DVD/VDP, VCR and TV modes.

1

Press the USE/LEARN button with the tip of a

pen etc., to set the learn mode.

• Both the mode selector buttons and LEARNED/TX indicator flash.

Flashes

2

Press the mode button of the equipment for

which learning is desired.

• Mode button and LEARNED/TX indicator flash.

3

Press the button that is to be learned.

The LEARNED/TX indicator stops flashing and

 

the mode button lights.

 

 

• Mode button and LEARNED/TX indicator

 

flashed if a button that cannot be “learned” is

 

pressed.

 

 

• To cancel, press the USE/LEARN button.

4

Point the remote control units directly at each

other and press and hold in the button on the

 

other remote control

 

 

unit which you

 

 

want to “learn”.

Other remote

 

 

control unit

2

 

 

1, 3, 7

 

 

 

 

 

 

 

 

 

 

 

6

To “learn” other buttons, repeat steps 2 to 5.

 

 

 

 

 

7

Once the learning operation is completed, press

the USE/LEARN button again.

The mode button and the LEARNED/TX indicator stop flashing and the learning mode is cancelled.

5 The mode button and the LEARNED/TX indicator lights, release the button on the other remote control unit.

• The mode button and the LEARNED/TX indicator start flashing again.

Check that the stored codes work properly.

NOTES:

•If the codes could not be stored, the LEARNED/TX indicator start flashing rapidly. For limited number of models, codes cannot be stored in RC-975.

•If the mode button and LEARNED/TX indicator start flashing rapidly, this means that the memory is already full, and the code you have just attempted to store was not stored.

To “learn” that code, first perform the resetting operation. (See page 33.)

31