| Audio |
| Graphic EQ | Default settings are underlined. |
Use the graphic equalizer to adjust the tone of each speaker.
“Graphic EQ” can be set when “MultEQ® XT” setting (vpage 116) is “Graphic EQ”.
Setting items | Setting details |
|
|
Speaker Selection | All : Adjust the tone of all speakers together. |
Select whether to adjust | Left/Right : Adjust the tone of left and right speakers together. |
tones for individual speakers | Each : Adjust the tone of each speaker. |
or for all speakers. |
|
Adjust EQ | q Select the speaker. |
Adjust tones for each | w Select the adjustment frequency band. |
frequency band. Adjust | 63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz |
the speaker selected in | • Select the speakers you want to adjust when “Left/Right” or “Each” |
“Speaker Selection”. | is selected. |
| e Adjust the level. |
| |
Curve Copy | Yes : Copy. |
Copy “Audyssey Flat” | No : Do not copy. |
(vpage 116) curve from |
|
MultEQ® XT. | • “Curve Copy” is displayed after Audyssey® Setup has been performed. |
•When you select “Curve Copy” and press ENTER, the “Copy “Audyssey
Flat”?” prompt is displayed. Select either “Yes” or “No”, and press
ENTER.
version Basic
version Advanced
Informations
Set Defaults
The “Graphic EQ” settings are returned to the default settings.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
When you select “Set Defaults” and press ENTER, the “Reset to the default values?”
prompt is displayed. Select either “Yes” or “No”, and press ENTER.
DVD | 118 |