Set up speakers (Audyssey® Setup)

Parameter Check

This function enables you to check the measurement results and equalizer characteristics after Audyssey® Setup.

1 Use uito select “Parameter Check” and then press ENTER.

Making the network settings (Network)

This unit can be connected to a home network (LAN) to listen to Internet radio or play back music files and still image (JPEG) files stored on a computer.

1 Connect the Ethernet cable (vpage 27 “Connecting to a home network (LAN)”).

version Basic

Audyssey Setup

Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone.

Set the following items if necessary.

Amp Assign

Channel Select

Parameter Check

Start

Audyssey Setup/Parameter Check

Check Audyssey Setup Measurement results.

Speaker Config.

Distances

Levels

Crossovers

Equalizers

Restore...

2 Turn on this unit (vpage 36).

This unit performs automatic network setup due to the DHCP function.

When connecting to a network that has no DHCP function, perform the setting in “Settings” (vpage 137).

version Advanced

2 Use uito select the item you want to check, then press ENTER. Measurement results for each speaker are displayed.

Speaker Config. Check the speaker configuration.

Distances Check the speaker distance.

Levels Check the speaker channel level.

Crossovers Check the speaker crossover frequency.

Equalizers Check the equalizer.

•If “Equalizers” is selected, press ui to select equalizing curve (“Audyssey” or “Audyssey Flat”) to

be checked.

Use ui to switch the display between the different speakers.

3 Press oor BACK.

The confirmation screen reappears. Repeat step 2.

Retrieving Audyssey® Setup settings

If you set “Restore...” to “Yes”, you can return to Audyssey® Setup measurement result (value calculated at the start by MultEQ® XT) even when you have changed each setting manually.

DVD

35

Informations