Installation/connection/setup of speakers (Advanced)

Procedure for speaker settings

Speaker installation

Speaker connection (vpage 84)

Set up speakers (vpage 92)

Speaker installation

•Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Here, we explain how to install the speakers using a typical example.

•The speaker impedance should be from 6 to 16 Ω.

This unit is compatible with Audyssey DSX® (vpage 168) and Dolby Pro Logic gz (vpage 168), which offers an even wider and deeper surround sensation.

When using Audyssey DSX®, install front wide speakers or front height speakers.

When using Dolby Pro Logic gz, install front height speakers.

Use the illustration below as a guide for how high each speaker should be installed. The height does not need to be exactly the same.

Surround

Front heightspeaker speaker

•Point slightly

downwards

Front wide

 

 

 

At least z1

speaker

2 – 3 ft/

3.3 ft/1 m

z2

60 – 90 cm

 

 

45˚

 

 

Surround back

Front

 

speaker

speaker

 

• Point slightly

 

 

downwards

GViewed from the sideH

version Basic

version Advanced

z1 Recommended for Dolby Pro Logic gz z2 Recommended for Audussey DSX®

NOTE

You cannot have audio output from the surround back speakers, front height speakers and front wide speakers simultaneously.

v See overleaf

DVD

82

Informations