Denon AVR-3313CI Language, ZONE2 Setup / ZONE3 Setup

Language Default settings are underlined.

Set the language for display on the menu screen.

Setting details

English / Français / Español

“Language” can also be set by the following procedure. However, the menu screen is not displayed. Following the display content to make the setting.

1.Press and hold the main unit’s o p for at least 3 seconds. “V. Format : <NTSC>” appears on the display.

2.Press the main unit’s i and set “Lange. : <ENGLISH>”.

3.Use the main unit’s o p and set the language.

4.Press the main unit’s ENTER to complete the setting.

ZONE2 Setup / ZONE3 Setup Default settings are underlined.

Set the audio to play back with multi-zone (ZONE2, ZONE3).

•“ZONE2 Setup” is displayed when “ZONE2” is selected with “Assign Mode” (vpage 130).

•“ZONE3 Setup” is displayed when “ZONE3” is selected with “Assign Mode” (vpage 130).

NOTE

When HDMI ZONE2 function is used, these settings are not available.

Setting items	Setting details
Bass	–10dB – +10dB (0dB)
Adjust bass tones.
Treble	–10dB – +10dB (0dB)
Adjust treble tones.
High Pass Filter	On : The low range is attenuated.
Make settings for cutting	Off : The low range is not attenuated.
the low range to reduce
distortion in the bass.
Lch Level	–12dB – +12dB (0dB)
Adjust the left channel
output level.

General

Setting items	Setting details
Rch Level	–12dB – +12dB (0dB)
Adjust the right channel
output level.
Channel	Stereo : Select stereo output.
Set the signal output from	Mono : Select monaural output.
multi-zone.	When “Assign Mode” (vpage 130) is set to “Z2/Z3(M)”, the
	“Channel” setting is automatically set to “Mono”.
Volume Level	Variable : Volume adjustment is enabled by main unit and remote control
Set the volume output level.	unit.
	–40dB (40) : Fix volume at –40 dB. Set when adjusting volume by external
	amplifier.
	0dB (80) : Fix volume at 0 dB. Set when adjusting volume by external
	amplifier.
	When “Assign Mode” (vpage 130) is set to “ZONE2”, “ZONE3”
	or “Z2/Z3(M)”, the “Volume Level” setting is automatically set to
	“Variable”.
Volume Limit	Off : Do not set a maximum volume.
Make a setting for	60 (–20dB) /70 (–10dB) /80 (0dB)
maximum volume.	This is displayed from –79 dB to 18 dB when “Scale” (vpage 116)
	is set to “–79.5dB – 18.0dB”.
Power On Volume	Last : Use the memorized setting from the last session.
Define the volume setting	Mute : Always mute when power is turned on.
that is active when the	1 – 98 (–79dB – 18dB) : The volume is adjusted to the set level.
power is turned on.	This is displayed from –79 dB to 18 dB when “Scale” (vpage 116)
	is set to “–79.5dB – 18.0dB”.
Mute Level	Full : The sound is muted entirely.
Set the amount of	–40dB : The sound is attenuated by 40 dB down.
attenuation when muting	–20dB : The sound is attenuated by 20 dB down.
is on.

version Basic

version Advanced

Informations

DVD 140