Setting items | Setting details |
Distances | Unit : Set the unit of distance. |
Set distance from listening | • Feet / Meters |
position to speakers. | Step : Set the minimum variable width of the distance. |
Measure beforehand the | • 1ft / 0.1ft |
distance from the listening | • 0.1m / 0.01m |
position to each speaker. | Set Defaults : The “Distances” settings are returned to the default |
| |
| settings. |
| • Yes : Reset to the defaults. |
| • No : Do not reset to the defaults. |
| When you select “Set Defaults” and press |
| ENTER, the “Reset to the default values?” |
| prompt is displayed. Select either “Yes” or |
| “No”, and press ENTER. |
Front L / Front R / F. Height L / F. Height R / Center / Subwoofer /
Surround L / Surround R / Surr. Back Lz / Surr. Back Rz / F. Wide L /
F. Wide R : Select speaker for distance setting.
zz When the “Speaker Config.” – “Surr. Back” setting (vpage 131) is set to “1spkr”, “Surr. Back” is displayed.
•0.0ft – 60.0ft / 0.00m – 18.00m : Set the distance.
•The speakers that can be selected differ depending on the “Amp Assign” (vpage 130) and “Speaker Config.” (vpage 130) settings.
•Default settings :
Front L / Front R / F. Height L / F. Height R / Center / Subwoofer / Front Wide L / Front Wide R : 12.0 ft (3.60 m)
Surround L / Surround R / Surr. Back L / Surr. Back R : 10.0 ft (3.00 m)
•Set the difference in the distance between the speakers to less than 20.0 ft (6.00 m).
NOTE
Speakers set to “None” in “Speaker Config.” (vpage 130) are not displayed.
| Speakers |
|
|
Setting items | Setting details |
|
|
Levels | Test Tone Start : Output test tone. |
Set the volume of the test | • Front L / F. Height L / Center / F. Height R / Front R / F. Wide R / |
tone to be the same when it | Surround R / Surr. Back Rz / Surr. Back Lz / Surround L / |
is output from each speaker. | F. Wide L / Subwoofer : Select speaker to output test tone. |
| zz When the “Speaker Config.” – “Surr. Back” setting (vpage 131) is |
| set to “1spkr”, “Surr. Back” is displayed. |
| • |
| When “Levels” is adjusted, the adjusted values are set for all the sound |
| modes. |
| NOTE |
| • Speakers set to “None” in the “Speaker Config.” (vpage 130) |
| settings are not displayed. |
| • When a headphones jack is inserted in the PHONES jack of this unit, the |
| “Levels” is not displayed. |
Set Defaults : The “Levels” settings are returned to the default settings.
•Yes : Reset to the defaults.
•No : Do not reset to the defaults.
When you select “Set Defaults” and press ENTER, the “Reset to the default values?”
prompt is displayed. Select either “Yes” or “No”, and press ENTER.
v See overleaf
version Basic
version Advanced
Informations
DVD | 132 |