| Picture Adjust | Default settings are underlined. |
Picture quality can be adjusted.
We recommend leaving the settings unchanged from the default settings. First adjust the display image quality on your TV, and use this menu only when you want to make fine adjustments.
•This item can be set when the input source is CBL/SAT DVD
MEDIA PLAYER | CD NETWORK TV AUDIO . |
|
•With input sources other than the ones above, this item can be set when “Video Select” is selected. In this case, the original input source settings are called out.
•Can be set when the “Video Conversion” setting (vpage 121) is “On”.
•
Setting items | Setting details |
Contrast | |
Adjust picture contrast. |
|
Brightness | 0 – +12 |
Adjust picture brightness. |
|
Saturation | |
Adjust picture chroma level |
|
(saturation). |
|
Hue | |
Adjust green and red |
|
balance. |
|
Noise Reduction | Off / Low / Medium / High |
Reduce overall video noise. |
|
Enhancer | 0 – +12 |
Emphasize picture contours. |
|
•“Picture Adjust” can not be set when component video and video signals are output.
•“Picture Adjust” can not be set when 4K signals are input.
| Video |
| HDMI Setup | Default settings are underlined. |
Make settings for HDMI video/audio output. | |
|
|
Setting items | Setting details |
|
|
Auto Lip Sync | On : Compensated. |
Make automatic | Off : Not compensated. |
compensation for timing |
|
shift in audio and video |
|
output. |
|
HDMI Audio Out | AVR : Play back through speakers connected to the unit. |
Select HDMI audio output | TV : Play back through TV connected to the unit. |
device. |
|
| • The audio signal input from the HDMI input connector can be output as |
| an output signal from the HDMI output connector by setting the HDMI |
| audio output destination to TV. |
| Audio signals input via the Analog/Coaxial/Optical input connectors |
| cannot be output from the HDMI output connector. |
| • When the HDMI control function is activated, priority is given to the TV |
| audio setting (vpage 95 “HDMI control function”). |
Video Output | Auto (Dual) : The presence of a TV connected to the HDMI MONITOR |
Make settings for HDMI | 1 or HDMI MONITOR 2 connector is detected automatically, and that TV |
monitor output. | connection is used. |
| Monitor 1 : A TV connected to the HDMI MONITOR 1 connector is always |
| used. Video is not output from the TV connected to the HDMI MONITOR |
| 2 connector. |
| Monitor 2 : A TV connected to the HDMI MONITOR 2 connector is always |
| used. Video is not output from the TV connected to the HDMI MONITOR |
| 1 connector. |
• If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are connected and “Resolution” (vpage 122) is set to “Auto”, the signals are output with a resolution compatible with both TV.
• With “Resolution” (vpage 122) not set to “Auto”, check whether the TV you are using is compatible with the resolution under “Video” – “Monitor” (vpage 142).
NOTE
Depending on the monitor you have connected, the display may not be correct when you set to “Auto (Dual)”. In such a case, set to either “Monitor 1” or “Monitor 2”.
v See overleaf
version Basic
version Advanced
Informations
DVD | 120 |