Change the display title of each zone to one you prefer.
Setting details
MAIN ZONE / ZONE2 / ZONE3
•Up to 10 characters can be input.
•For character input, see page 110.
Quick Select NamesChange the “Quick Select” display title to one you prefer.
Setting details
Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4
•Up to 16 characters can be input.
•For character input, see page 110.
Trigger Out 1 / Trigger Out 2Selects when to activate trigger out.
For details about how to connect the TRIGGER OUT jacks, see “TRIGGER OUT jacks” (vpage 26).
Setting details
nn When setting for zone (MAIN ZONE / ZONE2 / ZONE3)
Trigger out is activated through linkage to the power of the zone set to “On”.
nn When setting for input source
Activate trigger out when the input source set to “On” is selected.
Active for the zone set to “On” with “When setting for zone”.
nn When setting for HDMI monitor
Activate trigger out when the HDMI monitor set to “On” is selected.
Activate trigger out when the HDMI monitor set to “On” is selected. Active when the “MAIN ZONE” set to “On” with “When setting for zone” is selected, and when the input source set to “On” with “When setting for input source” is selected.
•On : Activate trigger on this mode.
•– –
| General |
| Auto Standby | Default settings are underlined. |
When you do not perform any operation on this unit with no audio or video input for a specified time, this unit automatically enters the standby mode. Before it enters the standby mode, “Auto Standby” is displayed on the display of this unit and the menu screen.
Setting details
30min : The unit goes into standby after 30 minutes.
60min : The unit goes into standby after 60 minutes.
Off : The unit does not go into standby automatically.
| Front Display | Default settings are underlined. |
Makes settings related to the display on this unit.
Setting items |
|
|
| Setting details | |||||||
Dimmer | Bright : Normal display brightness. |
|
|
|
| ||||||
Adjust the display | Dim : Reduced display brightness. |
|
|
|
| ||||||
brightness of this unit. | Dark : Very low display brightness. |
|
|
|
| ||||||
| Off : Turns the display off. |
|
|
|
| ||||||
| Buttons on the main unit can be used for operations. | ||||||||||
| Each time DIMMER is pressed, the setting is changed as shown | ||||||||||
| below. |
|
|
|
| ||||||
|
|
|
| Bright |
|
| Dim |
|
| ||
|
|
|
| Off |
|
| Dark |
|
| ||
|
|
|
|
|
|
|
| ||||
| NOTE |
|
|
|
| ||||||
| When “Dimmer” is set to “Off”, the display turns off and appears as if | ||||||||||
| there is no electricity. |
|
|
|
| ||||||
Channel | Output : Uses the output signal display for the channel indication on the | ||||||||||
Sets whether to use the | display. |
|
|
|
| ||||||
input signal display or | Input : Uses the input signal display for the channel indication on the | ||||||||||
output signal display for the | display. |
|
|
|
| ||||||
channel indication on the |
|
|
|
|
|
|
|
|
|
|
|
display. |
|
|
|
|
|
|
|
|
|
|
|
version Basic
version Advanced
Informations
DVD | 141 |