Manual Setup

Default settings are underlined.

Perform when setting the speakers manually or when changing settings made in Audyssey® Setup.

•If you change the speaker settings after performing Audyssey® Setup, it will not be possible to select Audyssey MultEQ® XT, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® (vpage 116).

•“Manual Setup” can be used without changing the settings. Please set if necessary.

 

Speakers

 

 

Setting items

Setting details

 

 

Speaker Config.

Front : Set the front speaker size.

Indicate speaker presence

• Large : Use a large speaker that can adequately play back low

and select speaker size

frequencies.

categories based on bass

• Small : Use a small speaker that has inadequate playback capacity for

reproduction capability.

low frequencies.

version Basic

Setting items

Setting details

 

 

Amp Assign

Assign Mode : Set the assignment mode.

Select power amplifier

• Main Only : Setting for 7.1-channel playback using surround back, front

usage method to match

height, or front wide speakers.

your speaker system.

• ZONE2 : Setting to assign the unit’s built-in power amplifier for ZONE2

 

and output the audio in stereo.

 

• ZONE3 : Setting to assign the unit’s built-in power amplifier for ZONE3

 

and output the audio in stereo.

 

• Z2/Z3(M) : Setting to assign the unit’s built-in power amplifier for ZONE2

 

and ZONE3 and output the audio in monaural.

 

• Bi-AMP : Setting to use the front speakers via the bi-amp connection.

 

• Front B : Setting to use the second set of front speakers for playback.

 

You can switch the front speakers A and B to be used for playback in

 

accordance with the 2-channel playback or multi-channel playback mode.

 

When you select this Front B setting, also perform the “Front Speaker

 

Setup” (vpage 133) procedure.

 

• 2CH : Setting to use the other front speakers for playback when you do

 

2-channel playback in DIRECT or STEREO mode.

NOTE

The HDMI audio signals for the input source selected in ZONE2 are not output from the ZONE2 speakers.

NOTE

Do not use the outward shape of the speaker to determine selection of a “Large” or “Small” speaker. Instead, use the frequencies set in “Crossovers” (vpage 133) as the standard for determining bass reproduction capability.

•When “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.

•When “Front” is set to “Small”, “Center”, “Surround“, “Surr. Back”, “Front Height” and “Front Wide” can not be set to “Large”.

Center : Set the presence and size of the center speaker.

•Large : Use a large speaker that can adequately play back low frequencies.

•Small : Use a small speaker that has inadequate playback capacity for low frequencies.

•None : Select when a center speaker is not connected.

“Large” is not displayed when “Front” is set to “Small”.

Subwoofer : Set the presence of a subwoofer.

•Yes : Use a subwoofer.

•No : Select when a subwoofer is not connected.

When “Front” is set to “Small”, “Subwoofer” is automatically set to “Yes”.

Surround : Set the presence and size of the surround speakers.

•Large : Use a large speaker that can adequately play back low frequencies.

•Small : Use a small speaker that has inadequate playback capacity for low frequencies.

•None : Select when the surround speakers are not connected.

•When “Surround” is set to “Large”, “Surr. Back”, “Front Height” and “Front Wide” can be set to “Large”.

•When “Surround” is set to “None”, “Surr. Back”, “Front Height” and “Front Wide” are automatically set to “None”.

version Advanced

Informations

v See overleaf

DVD

130