Setting items | Setting details | |
|
| |
Crossovers | Crossover : Set the crossover frequency. | |
Set the maximum frequency | • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / | |
of the bass signal output | 250Hz / Individual : Set the crossover frequency for all speakers. See the | |
from each channel to | speaker manual for information concerning speaker crossover frequency. | |
the subwoofer. Set the | The following settings can be set when the “Crossover” setting is set to | |
Crossover Frequency to | ||
“Individual”. | ||
suit the bass reproduction | ||
• Front / Center / Surround / Surr. Back / Front Height / Front Wide : | ||
capability of the speaker | ||
Select speaker for setting of crossover frequency. | ||
being used. | ||
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / | ||
| ||
| 250Hz : Set the crossover frequency. | |
| • “Crossovers” can be set when the “Bass” – “Subwoofer Mode” | |
| (vpage 131) setting is “LFE+Main”, or when you have a speaker that | |
| is set to “Small”. | |
| • Always set the crossover frequency to “80Hz”. When using small | |
| speakers, however, we recommend setting the crossover frequency to | |
| a higher frequency. | |
| • For speakers set to “Small”, sound below the crossover frequency | |
| is cut from the sound output. The cut bass sound is output from the | |
| subwoofer or front speakers. | |
| • The speakers that can be set when “Individual” is selected differ | |
| depending on to the “Subwoofer Mode” setting (vpage 131). | |
| • When “LFE” is selected, speakers set to “Small” at “Speaker Config.” | |
| can be set. If the speakers are set to “Large”, “Full Band” is displayed | |
| and the setting cannot be made. | |
| • If set to “LFE+Main”, this setting can be made regardless of the | |
| speaker size. |
| Speakers | |
|
| |
Setting items | Setting details | |
|
| |
Front Speaker Setup | 2ch Playback : The front speakers used in direct play (2 channel), stereo | |
Set the front speakers to | play and pure direct play (2 channel) are set in advance. | |
use for every sound mode. | • A : Front speaker A is used. | |
NOTE | • B : Front speaker B is used. | |
• A+B : Both front speakers A and B are used. | ||
This can be set when | ||
Multi ch Playback : The front speakers used in play modes other than | ||
“Assign Mode” is set to | direct play (2 channel), stereo play and pure direct play (2 channel) are set | |
“Front B” (vpage 130). | in advance. | |
| • A : Front speaker A is used. | |
| • B : Front speaker B is used. | |
| • A+B : Both front speakers A and B are used. | |
2ch Playback | Setting : Select the method for setting the speakers used in the | |
Select the method for | direct and stereo playback modes. | |
setting the speakers used | • Auto : The settings at “Speakers” (vpage 129) are applied. | |
in the | • Manual : Make separate settings for | |
stereo playback modes. | settings: |
Front : Set the front speaker size.
•Large : Use a large speaker that can adequately play back low frequencies.
•Small : Use a small speaker that has inadequate playback capacity for low frequencies.
If “Speaker Config.” – “Subwoofer” (vpage 130) is set to “No”, the setting is automatically set to “Large”.
Subwoofer : Set the presence of a subwoofer.
•Yes : Use a subwoofer.
•No : Select when a subwoofer is not connected.
If “Speaker Config.” – “Subwoofer” (vpage 130) is set to “No”, the setting is automatically set to “No”. If the “Front” setting is “Small”, the setting is automatically “Yes”.
v See overleaf
version Basic
version Advanced
Informations
DVD | 133 |