Speaker connection

Connecting 6.1-channel speakers using one surround back speaker

If using only one surround back speaker, connect to the “L” side of the SURROUND BACK terminal. For speaker settings in this case, see “When 6.1ch speakers are installed” (vpage 83).

To perform 6.1-channel playback using the surround back speaker, set “Assign Mode” to “Main Only” in steps 3 to 5 for “Set up “Amp Assign”” (vpage 92).

Also use the “Speaker Config.” setting (vpage 131) to set “Surr. Back” to “1spkr”.

Cables used for connections

Audio cable (sold separately)

Speaker cable

Subwoofer cable

NOTE

•For speaker cable connections, see page 84.

•For speaker impedance , see page 84.

FL SW

FR

 

C

SL

SR

SB

DVD

86

version Basic

version Advanced

Informations