Denon AVR-3808CI manual 11

Video Conversion Function

•This function automatically converts various formats of video signals input to the AVR-3808CI into the format used to output the video signals from the AVR-3808CI to a monitor.

•The AVR-3808CI’s video input/output circuitry is compatible with the following four types of video signals:

Digital video signals: HDMI

Analog video signals: Component video, S-Video and Video

GFlow of video signals inside the AVR-3808CIH
Main zone
High picture	HDMI connector	HDMI connector
quality playback
	Component video	Component video	Monitor
	connectors	connectors
	S-Video connector	S-Video connector
	Video connector	Video connector
	Video inputs	Video outputs
	: When 480i/576i signals are input in the main zone
	GFlow of video signals for ZONE2H
ZONE2
High picture
quality playback	S-Video connector		ZONE2
			monitor
	Video connector	Video connector
	Video inputs	Video outputs

•When not using this function, connect a monitor output with the same type of connector as the video input connector.

•The resolution of the HDMI input-compatible monitor connected to the AVR-3808CI can be checked at GUI menu “Information” – “HDMI Information” – “Monitor” (vpage 45).

NOTE

•HDMI signals cannot be converted into analog signals.

•1080p component input video signals cannot be output to anything other than component video connectors.

•480p/576p, 1080i and 720p component video input signals cannot be converted into S-Video or Video format.

•When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate.

Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting