Setup Connections Started Getting

<STANDARD> <DSP SIMULATION>

Quick Select Function

With this function, the currently playing input source, input mode, surround mode, room EQ settings and volume can be stored in the memory.

1Set the input source, input mode, surround mode, room EQ settings and volume to the conditions you want to store.

2Press and hold the desired QUICK SELECT.

Keep pressing the button until the quick select indicator lights.

Personal Memory Plus Function

This function sets the settings (input mode, surround mode, etc.) last selected for the individual input sources. When you switch to an input source, the settings are automatically set to the ones that were set the last time that input source was used.

The surround parameters, tone control, room EQ settings and the volumes of the different speakers are stored for the individual surround modes.

Troubleshooting Information Zone-Multi Control Remote Playback

<POWER>

QUICK SELECT

QUICK SELECT

About the button names in these explanations

<> : Buttons on the main unit

[ ] : Buttons on the remote control unit

Button name only:

Buttons on the main unit and remote control unit

[Quick Select Defaults]

 

Input Source

Volume

Quick Select 1

DVD

–40 dB

Quick Select 2

TV/CBL

–40 dB

Quick Select 3

VCR

–40 dB

•To call out the settings, press QUICK SELECT at which the desired settings were stored.

•The Quick Select name can be changed (vpage 34).

NOTE

Input sources stored with the quick select function cannot be selected if they have been deleted at GUI menu “Manual Setup” – “Option Setup” – “Source Delete” (vpage 34). In this case, store them again.

Last Function Memory

This stores the settings as they were directly before the standby mode was set.

When the power is turned back on, the settings are restored to as they were directly before the standby mode was set.

Backup Memory

The various settings are backed up for about 1 week, even if the power is turned off or the power cord is disconnected.

57