gNight Mode

Optimized setting for late-night listening.

[Selectable items] OFF Low Middle High

Operating from the main remote control unit

Press the NGT button.

The “” indicator lights when “Low”, “Middle” or “High” is selected.

OFF Low Middle

High

Picture Adjust

Adjust the picture quality.

FMenu tree F

Parameter

Picture Adjust

aContrast s Brightness d Chroma Level f Hue

Information

Status

Shows information about current settings.

FMenu tree F

Information

Setup Connections Started Getting

hAudio Delay

Compensate for mismatched timing between video and audio.

Delay audio.

This sets the delay time for audio signals.

[Variable range]

0 ms

~

200 ms

Operating from the main unit or main remote control unit

qPress the AUDIO DELAY button on the main unit or the A. DL button on the main remote control unit.

wUse the o p button to set.

This cannot be adjusted when playing in the EXT. IN, DIRECT or STEREO mode (with “Front” set to “Large”, “Tone Defeat” to “ON” and “Room EQ” to “OFF”).

The adjustment range is 0 to 100 ms when the Auto Lipsync Correction function is activated.

aContrast

Adjust picture contrast.

[Variable range]

–6

~

0

~

+6

sBrightness

Adjust picture brightness.

[Variable range]

0

~

+12

dChroma Level

Adjust picture chroma level (saturation).

[Variable range]

–6

~

0

~

+6

fHue

Adjust color hue.

[Variable range]

–6

~

0

~

+6

Status

aMAIN ZONE s ZONE2/3

aMAIN ZONE

Shows information about settings for main zone.

The items displayed differ according to the input source.

[Items to be checked]

 

Select Source

Name

Surround Mode Input Mode

Assign Room EQ Video Select Src Level Rec Select

Night Mode

RESTORER

etc.

sZONE2/3

Shows information about settings for multi-zone.

[Items to be checked] Power Select Source Volume Level

Troubleshooting Information Zone-Multi Control Remote Playback

Adjusting the “Contrast”, “Brightness”, “Chroma Level” and “Hue” settings does not affect the HDMI input signal.

“Hue” can be adjusted for composite video and S-Video signals.

The adjustment values are stored for the individual input sources.