Zone-Multi Control Remote Playback Setup Connections Started Getting

Antenna terminals

An F-type FM antenna cable plug can be connected directly.

Direction of broadcasting station

FM antenna

AM loop antenna

(supplied)

 

75 Ω/ohms

 

Coaxial cable

 

FM indoor antenna

 

(supplied)

 

Ground

AM outdoor antenna

 

Troubleshooting Information

AM loop antenna assembly

Remove the vinyl tie and take out the connection line.

a. With the antenna on top of any stable surface.

Mount

Connect to the AM antenna terminals.

Bend in the reverse direction.

b. With the antenna attached to a wall.

Installation hole Mount on wall, etc.

Connection of AM antennas

1. Push the

2. Insert the

3. Return the

lever.

conductor.

lever.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE

•Do not connect two FM antennas simultaneously.

•Even if an external AM antenna is used, do not disconnect the AM loop antenna.

•Make sure the AM loop antenna lead terminals do not touch metal parts of the panel.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

19