The currently selected multi-zone indicator lights.

Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

Multi-zone

indicator [ZONE SELECT]

[ZONE OFF] [ADVANCED SETUP]

[MENU]

 

[RANDOM]

[USB]

[REPEAT]

[ALL MUSIC/

 

FAVORITES]

Switching Zones

Use this procedure to select the zone to be operated by the sub remote control unit.

1Press [ZONE SELECT].

2While the multi-zone indicator is light, press [ZONE SELECT] to select the zone to be operated.

The currently selected multi-zone indicator lights.

Setting the Zone for Which the Sub Remote Control Unit is Used (ZONE SELECT LOCK Mode)

We recommend always using the sub remote control unit for the same room. When this is done, the unit can be set so that the zone does not switch when buttons are operated.

1Use the tip of a pen to press [ADVANCED SETUP]. All the multi-zone indicators light.

2Select the multi-zone to be set. The selected multi-zone indicator lights.

qTo set to main zone

: Press [REPEAT].

wTo set to ZONE2

: Press [RANDOM].

eTo set to ZONE3

: Press [USB].

3Use the tip of a pen to press [ADVANCED SETUP]. The multi-zone indicator turns off.

To Cancel

1Use the tip of a pen to press [ADVANCED SETUP]. The currently selected multi-zone indicator lights.

2Press [ZONE SELECT].

All the multi-zone indicators light.

3Use the tip of a pen to press [ADVANCED SETUP]. The multi-zone indicator turns off.

Setting the Remote ID

When using multiple DENON AV receivers in the same room, make this setting so that no AV receiver other than the desired one operates.

1While pressing [MENU], press [ADVANCED SETUP] with the tip of a pen.

The multi-zone indicator corresponding to the currently selected remote ID flashes.

2Select the remote ID to be set.

qTo set to 1 : Press [REPEAT]. The “M” indicator flashes. wTo set to 2 : Press [RANDOM]. The “Z2” indicator flashes.

eTo set to 3 : Press [USB]. The “Z3” indicator flashes.

rTo set to 4 : Press [ALL MUSIC/FAVORITES]. The “Z4” indicator flashes.

3While pressing [MENU], press [ADVANCED SETUP] with the tip of a pen.

The multi-zone indicator turns off.

NOTE

When changing a setting, be sure to set the same remote ID as the AVR-3808CI’s (vpage 35).

Resetting the Settings

While pressing [ZONE OFF], press [ADVANCED SETUP] with the tip of a pen.

All the multi-zone indicators flash 4 times, then all the settings are restored to their defaults.

67