Denon AVR-3808CI Other Operations and, Functions, Other Operations

Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

Surround mode

<SOURCE SELECT> INPUT MODE

<ZONE2/3 / REC SELECT> uiop

CH SELECT

Surround mode

INPUT MODE

CH SELECT

uiop

About the button names in these explanations

<> : Buttons on the main unit

[ ] : Buttons on the remote control unit

Button name only:

Buttons on the main unit and remote control unit

Operating the AVR-3808CI Using a Browser (Web control)

This function lets you operate the AVR-3808CI using Internet Explorer.

1Check the AVR-3808CI’s IP address.

: “Manual Setup” – “Network Setup” – “Network Information” (vpage 32)

2Input the AVR-3808CI’s IP address in Internet Explorer.

The AVR-3808CI can be operated in the same way as with regular Internet browsing.

To use the web control function, set the GUI menu “Manual Setup”– “Network Setup” – “Other” – “Power Saving” setting to “OFF” (vpage 32).

Other Operations and

Functions

Other Operations

Playing Super Audio CDs

1At the “Digital” or “HDMI” setting (vpage 39), select the input source for which “DENON LINK” or

“HDMI” is assigned.

The “” or “” indicator lights on the display.

2Use INPUT MODE to select “Auto” (vpage 37, 38). Select the input mode according to the program source to be played.

3Select the surround mode (vpage 40, 41). We recommend playing in the DIRECT mode.

4Start playing the Super Audio CD. The “” indicator lights on the display.

For operating instructions, refer to the respective equipment’s operating instructions.

•When playing DSD signals in the DIRECT or PURE DIRECT mode, the DSD signals are converted as such into analog signals. When playing in other surround modes, the DSD signals are first converted into PCM format, then into analog signals.

•“DSD DIRECT” is shown on the display when playing DSD 2-channel signals in the DIRECT mode. “DSD MULTI DIRECT” is shown on the display when playing DSD multi--channel signals in the DIRECT mode.