
Troubleshooting Information
<SOURCE SELECT>
<TUNING PRESET> | <STATUS> |
[ | TU] | [ | TU] |
(DEVICE1 mode) |
| (DEVICE2 | |
|
|
| mode) |
| [A ~ G] |
|
|
| [df] | [df] | |
| [BAND] |
|
|
| [MODE] |
|
|
| [MEMO] |
|
|
[CHANNEL] |
|
| |
| [1 ~ 8] | [SAT TU] | |
| (AMP mode) |
[TUNER]
(AMP mode) ,
[SHIFT]
Basic Operation
1Either turn <SOURCE SELECT> or press [TUNER]
(AMP mode) to select “TUNER”.
: ”Source Select” (vpage 36, 37)
2To operate using the main remote control unit, set the remote control unit to the TUNER (DEVICE1)
mode.
(vpage 59 “Remote Control Unit Operations”)
3Press [BAND] to select “FM” or “AM”.
4Tune in the desired broadcast station.
qTo tune in automatically (Auto Tuning)
Press [MODE] to light the “AUTO” indicator on the display, then use [df] to select the station you want to hear.
wTo tune in manually (Manual Tuning)
Press [MODE] to turn off the display’s “AUTO” indicator, then use [df] to select the station you want to hear.
•It is also possible to switch to “FM” or “AM” in step 1 by pressing [TUNER].
•If the desired station cannot be tuned in with auto tuning, tune it in manually.
•When tuning in stations manually, press and hold [df] to change frequencies continuously.
•The time for which the GUI menus are displayed can be set at GUI menu “Manual Setup” – “Option Setup” – “GUI” – “Tuner” (vpage 34).
Presetting Radio Stations
(Preset Memory)
Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset.
1Tune in the broadcast station you want to preset.
2Press [MEMO].
3Press [A ~ G] to select the block in which the station is to be preset, then press [CHANNEL] or [1 ~ 8] to select the preset number.
b The memory block can also be selected by pressing [SHIFT].
4Press [MEMO] again to complete the setting.
•To preset other stations, repeat steps 1 to 4.
•Stations can be preset automatically at GUI menu “Source Select”
– “Tuner” – “Auto Preset” (vpage 37).
NOTE
Preset stations are erased by overwriting them.
About the button names in these explanations
<> : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit