
A3Firmware Update
Update the firmware of the receiver.
[Selectable items]
Start :
Execute the update process.
When updating starts, the power indicator lights red. “Updating zzz” is shown on the display during updating. Once updating is completed, “Updating complete” is displayed.
“Latest firmware” is displayed when the firmware is the latest version.
b If the display reads as shown below, check the settings and network environment, then update again.
Display | Description |
Updating failed | Updating failed. |
Login failed | Failure to log into server. |
Server is busy | Server is busy. Wait a while then try again. |
Connection failed | Failure connecting to server. |
Regist failed | Failure registering to server. |
NOTE
•Connection to the network and specific settings are required to update the firmware. For details, see page 20, 32.
•Do not turn off the power until updating is completed.
•Normally there is no need to use this function, aside from the cases described below.
⋅The Firmware Update function is only used for updating the firmware (free or for a charge) via the Internet, for example for the purpose of adding functions to the
⋅Information regarding the Firmware Update function will be announced on the DENON web site each time related plans are defined.
⋅A broadband connection to the Internet is required to use this function (v page 20).
⋅Even with a broadband connection to the Internet, approximately 1 hour is required for the updating procedure to be completed. Once updating starts, normal operations on the
Furthermore, updating the firmware may reset the backup data for the parameters, etc., set for the
Language
This sets the language used on the display screens.
FMenu tree F
Manual Setup
Language
[Selectable items]
English Français
Operating from the main unit
q Press and hold the STATUS and RETURN buttons for at least 3 seconds.
“Video Format” appears on the display.
wUse the ui button to set “GUI Language”. e Use the o p button to make the setting.
r Press the ENTER, MENU or RETURN button to complete the setting.
Source Select
Use this procedure to select the input source and make the settings related to playing input sources.
Input Source Selection
FMenu tree F
Source Select
TUNER
PHONO
CD
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
NET/USB
XM
Operating from the main unit or main remote control unit
GOperation on the main unitG
Turn the SOURCE SELECT knob.
b If “Rec Select” or “Video Select” is selected for the input source, press the SOURCE button before turning the SOURCE SELECT knob.
GOperation on the main remote control unitG
Press the SOURCE SELECT button.
The desired input source can be selected directly.
Troubleshooting Information
(Main unit) | (Main remote control unit) |