sVolume Control
Set the main zone volume setting.
Volume Limit
Make a setting for maximum volume.
[Selectable items] | OFF |
|
|
| 0dB |
Power On Level
This sets the volume set when the main zone’s power is turned on.
[Selectable items] Last – – –
Mute Level
This sets the amount of attenuation of the volume when the mute mode is set in the main zone.
[Selectable items] Full
dSource Delete
Remove input sources that are not used from the display.
[Selectable items] ON Delete
NOTE
•Input sources being used in the various zones cannot be deleted.
•Input sources set to “Delete” cannot be selected from GUI menu “Source Select” or using the SOURCE SELECT knob on the main unit or SOURCE SELECT button on the remote control unit.
fGUI
Make GUI related settings.
Screensaver
Make screensaver settings.
Use the screensaver to prevent
[Selectable items] ON OFF
Wall Paper
Change the GUI background.
[Selectable items] | Picture |
| Black |
| Gray |
| Blue |
|
|
|
|
|
|
|
|
Format
Select the video output signal format to match the monitor.
[Selectable items] NTSC PAL
NOTE
When a format other than the video format of the connected monitor is set, the picture will not be displayed properly. Use the procedure described below to change the video format.
Operating from the main unit
q Press and hold the STATUS and RETURN buttons for at least 3 seconds.
“Video Format” appears on the display.
wUse the o p button to make the setting.
ePress the ENTER, MENU or RETURN button to complete the setting.
Text
Text information display.
[Selectable items] ON OFF
Master Volume
Master volume display during adjustment.
[Selectable items] ON OFF
NET/USB / iPod / Tuner
This sets the time the
[Selectable items] | Always |
| 30s |
| 10s |
| OFF |
gQuick Select Name
Change the Quick Select name.
Up to 16 characters can be input.
[Input characters] A ~ Z a ~ z 0 ~ 9
! “ # % & ’ ( ) * + ,
Troubleshooting Information
34