Resetting the Microprocessor

Perform this procedure if the display is abnormal or if operations cannot be performed.

When the microprocessor is reset, all the settings are reset to their default values.

1Turn off the power using <POWER>.

2Press <POWER> while simultaneously pressing

<STANDARD> and <DSP SIMULATION>.

3Once the display starts flashing at intervals of about 1 second, release the two buttons.

If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.

Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

58