Recording on an External Device (REC OUT mode)

You can listen to one program source while recording a different program source.

1

Press <ZONE2/3 / REC SELECT>.

 

 

 

 

 

 

“ZONE2 SOURCE” is shown on the

display.

 

 

 

ZONE2 SOURCE

 

ZONE2 TUNER

 

 

 

····

 

 

 

ZONE2 XM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RECOUT XM

 

 

RECOUT NET/USB

 

 

····

 

 

 

RECOUT SOURCE

 

 

 

 

 

 

2Turn <SOURCE SELECT> until “RECOUT SOURCE” is displayed.

The “” indicator lights.

3Turn <SOURCE SELECT> to choose the input source to be recorded.

4Play the program source.

For operating instructions, refer to the respective equipment’s operating instructions.

To record FM or AM broadcasts, select the broadcast (vpage 47).

5Start recording.

For operating instructions, refer to the respective equipment’s operating instructions.

•To cancel, press <ZONE2/3 / REC SELECT>, then turn <SOURCE SELECT> until “ZONE2 SOURCE” is displayed.

•Make a test recording before starting the actual recording.

•Signals are only output to the analog REC OUT connectors when the digital signals input to the digital input connectors (OPTICAL/ COAXIAL) are PCM (2-channel) signals.

•Digital audio signals input to the DENON LINK or HDMI connectors are not output to the REC OUT connectors, so connect using the OPTICAL or COAXIAL connectors.

•Sources selected with the REC OUT mode are output from ZONE2 as well.

•In the REC OUT mode, the remote control unit’s ZONE2 mode buttons cannot be operated.

•The “XM” digital audio output signals are not output from the OPTICAL2 or OPTICAL3 output connectors. Also, network audio signals (Internet radio, music server, USB) are not output if they are copyright-protected.

NOTE

•Recordings you make are for your personal enjoyment and should not be used for other purposes without permission of the copyright holder.

•When “DENON LINK” is assigned at the GUI menu “Assign” setting, the PCM signals, network audio signals (Internet radio, music server and USB), XM signals input from the digital input connectors cannot be output from the analog REC OUT connectors.

•Input sources for which “Delete” is selected at “Source Delete” cannot be selected.

Convenient Functions

Channel Level

You can adjust the channel level either according to the playback sources or to suit your taste, as described below.

1Press CH SELECT.

2Use ui or CH SELECT to select the speaker.

The speaker that can be set switches each time one of the buttons is pressed.

3Use o p to adjust the volume.

b “OFF” can be set by pressing o when the subwoofer’s volume is set to –12 dB.

Fader Function

This function lets you adjust (fade) the sound from all the front or rear speakers at once.

1Press CH SELECT.

2Press ui or CH SELECT to select “Fader”.

3Use o p to adjust the volume of the speakers.(o: front, p: rear)

•The fader function does not affect the subwoofer.

•The fader can be adjusted until the volume of the speaker adjusted to the lowest value is –12 dB.

Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

56