Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

Subwoofer Att.

Attenuate subwoofer level when using EXT. IN mode.

[Selectable items] ON OFF

Set this to “ON” if the subwoofer channel level seems too high when playing Super Audio CD.

Subwoofer

Turn subwoofer output on and off.

[Selectable items] ON OFF

Default

Resets the settings to the default values.

sTone

Adjust the tonal quality of the sound.

Tone Defeat

Turn tone adjustments off.

[Selectable items] ON OFF

The tone cannot be adjusted when in the DIRECT mode.

Bass

Adjust low frequency range (bass).

[Variable range]

–6dB ~ +6dB

 

 

Treble

Adjust high frequency range (treble).

[Variable range]

–6dB ~ +6dB

“Bass” and “Treble” can be set when “Tone Defeat” is set to “OFF”.

dRoom EQ

Select room equalizer for current environment.

[Selectable items]

Audyssey : Optimize frequency response of all speakers.

Audyssey Byp. L/R : Optimize frequency response of speakers except front L and R speakers.

Audyssey Flat

: Optimize frequency response of all speakers to

 

flat response.

Manual

: Apply frequency response set with “Manual

 

EQ”.

OFF

: Turn equalizer off.

Operating from the main unit or main remote control unit

Press the ROOM EQ button on the main unit or the EQ button on the main remote control.

 

 

 

Audyssey

 

 

Audyssey Byp. L/R

 

 

 

 

 

OFF

 

 

Manual

 

Audyssey Flat

 

 

 

 

When “Audyssey” is selected, “” lights.

When “Audyssey Byp. L/R” or “Audyssey Flat” is selected, or when

the auto setup measuring results have changed, “” lights.

•“Audyssey”, “Audyssey Byp. L/R” and “Audyssey Flat” can be selected after the auto setup procedure has been performed.

•If the settings of the speakers for which “None” has been determined at “Auto Setup” are changed, “Audyssey”, “Audyssey Byp. L/R” and “Audyssey Flat” cannot be selected and measurements have to be taken again to include the newly-added speakers.

•When using headphones, “Room EQ” is always set to “OFF”.

fRESTORER

This function restores compressed audio signals to how they were before compression and corrects the sense of volume of the bass to obtain richer playback sound.

[Selectable items]

OFF

Mode1 (RESTORER 64)

Mode2 (RESTORER 96)

Mode3 (RESTORER HQ)

The default setting for “NET/USB” and “iPod” is “Mode3”. All others are set to “OFF”.

Operating from the main unit or main remote control unit

During playback, press the RESTORER button on the main unit or the RSTR button on the main remote control unit.

When set to something other than “OFF”, “” is displayed.

 

OFF

 

 

Mode 1

 

 

Mode 2

 

 

 

(RESTORER 64)

(RESTORER 96)

 

 

 

 

Mode 3

 

 

 

 

 

 

 

 

 

 

 

 

(RESTORER HQ)

 

 

 

About the RESTORER function

•Such compressed audio formats as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals.

•This is displayed on the GUI menu and can be set when the input source is set to “XM” or “NET/USB”, or when analog signals (including AM/FM signals) or PCM signals (fs = 44.1/48 kHz) are input.

43