Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

<SOURCE SELECT> <ZONE3 ON/OFF> <VOLUME>

<ZONE2 ON/OFF>

<ZONE2/3 / REC SELECT>

[ AMP]

 

[ON]

[ON]

[OFF]

[OFF]

(ZONE2

mode)

(ZONE3

VOLUME

mode)

 

[MUTE]

SOURCE

SELECT

(Main remote control unit)

[ZONE SELECT]

[OFF] [ON]

SOURCE SELECT

(Sub remote control unit)

About the button names in these explanations

<> : Buttons on the main unit

[ ] : Buttons on the remote control unit

Button name only:

Buttons on the main unit and remote control unit

Multi-Zone Operations

Turning the Power On and Off

GOperation on the main unitH

Press <ZONE2 ON/OFF>, <ZONE3 ON/OFF> for the zone to be operated. When the power turns on, the multi-zone indicator lights on the display.

GOperation on the remote control unitH

In the zone mode you want to operate, press [ON] or [OFF].

Selecting the Input Source

GOperation on the main unitH

qPress <ZONE2/3 / REC SELECT> and select the zone to be adjusted. w Turn <SOURCE SELECT>.

GOperation on the remote control unitH

In the zone mode you want to operate, press [SOURCE SELECT].

Adjusting the Volume

GOperation on the main unitH

qPress <ZONE2/3 / REC SELECT> and select the zone to be adjusted. w Turn <VOLUME> to adjust.

GOperation on the remote control unitH

In the zone mode whose volume you want to adjust, press [VOLUME].

[Variable range] – – – –70dB ~ –40dB ~ +18dB

The volume can be adjusted when GUI menu “Manual Setup” – “Zone Setup” – “(select the zone)” – “Volume Level” is set to “Variable”.The volume can be increased up to the value set at GUI menu “Manual Setup” – “Zone Setup” – “(select the zone)” – “Volume Limit” (vpage 33).

Turning off the Sound Temporarily

In the zone mode for which you want to mute the sound, press

[MUTE].

The sound is reduced to the level set at GUI menu “Manual Setup”

–“Zone Setup” – “(select the zone)” – “Mute Level” (vpage 33). To cancel, either adjust the volume or press [MUTE] again.

The setting is canceled when the zone’s power is turned off.

•The source selected for ZONE2 is also output from the recording output connectors.

•For ZONE2, the “Zone Setup” can be made while watching the on- screen display. Also, when ZONE3 is operated, the on-screen display appears on the ZONE2 monitor, so operation can be performed watching this on-screen display.

 

ZONE2 MENU

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INPUT :DVD

 

ZONE2 MENU

 

 

 

 

SIGNAL:ANALOG

 

>Channel

STEREO

VOL. :-40dB

 

 

Vol.Lev.

VAR

 

 

 

 

>Bass

0dB

Vol.Limit

OFF

P.On Lev.

LAST

Treble

0dB

Mute Lev.

FULL

HPF

OFF

Lch Lev.

0dB

 

 

 

Rch Lev.

0dB

 

 

 

 

 

 

 

 

 

 

NOTE

•When the input source to which the digital input connectors (OPTICAL/COAXIAL) are assigned is selected in ZONE2 or ZONE3, playback is only possible if the digital signal being input is in PCM (2-channel) format.

•Digital audio signals input from the DENON LINK or HDMI connectors cannot be played in multi-zone.

•When certain digital signals are being input, noise may be output from the ZONE2 and ZONE3 audio output connectors.

•When “DENON LINK” is assigned at the GUI menu “Assign” setting, the PCM signals, network audio signals (Internet radio, music server and USB), XM signals input from the digital input connectors cannot be output from the ZONE2 and ZONE3 audio output connectors.

71