Terminal Setup
At the prompt, choose Yes or No to download configurations. Choosing Yes is needed to run in Telnet mode.
The following screen will appear.
Choose OK at the prompt above.
Note: The screen above is for the BHT 103 terminal. The BHT 7500W terminal requires special firmware version SB06, and the BHT 7500S terminal requires latest firmware version 1.12.
At the same time, press 1 and Enter to start file download.
YMODEM MENU
1:DOWNLOAD
2:UPLOAD
The terminal will start downloading files. The following screen will appear.
DOWNLOAD FILE
WAIT
In the event of a failure, verify the following:
•The null modem cable connection between terminal and PC and condition of all connectors.
•The specification of correct COM port.
•The correct cradle power supply
Supported Equipment Manual • March, 2006 |
