Quick Start
The terminal then associates with an access point, contacts the Twin Client Manager, and then downloads the program, configuration, and IP address of the terminal.
During the download, progress messages are displayed on the terminal. Pauses in activity of up to 10 seconds will be observed as the terminal writes to EEPROM. The download requires approximately 2 minutes to complete.
The following describes the error messages that will be displayed on the terminal in the event of a download failure, and can be used as a guide to correcting the problem.
Errors in System Mode
If some error occurs during operation in System Mode, one of the following error messages will appear on the LCD.
When selecting a program file or data file
•Problem
You attempted to execute a user program in the EXECUTE PROGRAM menu, but no user program files had been stored in the memories.
EXECUTE PROGRAM
NO FILES EXIST
•Solution
Press the C key to return to the SYSTEM MENU screen, and then download user programs.
•Problem
In the SET SYSTEM menu, you attempted to select a user program file as an execution program to be run when the power is applied, but no user program files had been stored in the memories.
EXECUTE PROGRAM
NO FILES EXIST
•Solution
Press the C key to return to the SYSTEM MENU screen then download user programs.
Supported Equipment Manual • March, 2006 |
