Error Message Resolution Guide
Message | Reason | Solution | Reference Tech Note |
Font Loading Error; | Could not load the font. | Ensure that the font is available to load. | |
Printer Not Ready\nPress R to | Can not print. | Check cable, battery, communication | |
Retry\nC to Cancel Print; |
| settings and paper in the printer. |
|
Mobile Unit in\nDemonstration | Running in demo mode. | Purchase a license from Connect. | |
Mode\nfor TwinClient; |
|
|
|
Connected to Host; | Successful connection to the target Advisory message. | ||
| Host. |
|
|
Telnet Mode not\nsupported on\nthis | This Mobile Unit must be used with | Order a Connect Server. | |
Mobile Unit; | a Connect Server. |
|
|
Telnet Setup files\nnot found. | Customer specific configuration | Load the configuration files into the Mobile | |
Reload\nfiles then switch; | files are missing. | Unit from Twin Client Manager. |
|
Switched Client to\nTelnet Direct Mode; Mobile Unit running in Telnet mode | Advisory message. | ||
| direct to the target Host. |
|
|
Switched Client to\nServer Based | Mobile Unit running through a | Advisory message. | |
Mode; | Connect server in Server mode |
|
|
| usually at port 1800. |
|
|
Port 23 is only\nallowed in Telnet Mode;
Can not set the port to 23 in Server Advisory message. | |
mode. Port 23 is the standard |
|
Telnet port. |
|
Not Enough Memory\nTo Run; | Mobile Unit does not have the | Expand the Mobile Unit memory. | |
| capacity to run the program do to |
|
|
| memory restrictions. |
|
|
Press any key; | Press a key to continue. | Advisory message. |
Supported Equipment Manual • March, 2006 |
