Quick Start
Starting a Telnet Session
Press <1> Execute Program.
SYSTEM MENU
1:EXECUTE PROGRAM
2:DOWNLOAD
3:UPLOAD
4:SET SYSTEM
5:TEST
6:VERSION
7:FTP
8:RF
Select an emulation and press Enter.
After a Telnet session has been successfully established, the terminal will remain in session for a maximum of 30 minutes at a time until it has been authorized. Once authorized, there is no software restriction on the session time. The instructions for authorizing the terminal are presented in Authorizing PowerNet.
Note: In order to run Twin Client, the heap area must be set up as follows. (This is valid for the BHT7500 only.)
Start system menu ([SF]?[1]+[PW])
Select set system menu ([4]?[ENT])
Select heap size set menu ([SF]+[1])
+ | + | ||
SET FOR RUNNING C PROGRAMS | |||
1:HEAP SIZE [ | 76]KB | ||
(in 4KB units) | |||
MIN : | 76KB | ||
MAX : | 140KB | ||
Set heap size as 140KB ?push [ENT] (cursor move to ]) ?push [C] (70 is turn off) ?push [1]?[4]?[0]?[ENT] ?push[C] to system menu
Supported Equipment Manual • March, 2006 |
